Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Austria (89)
Belgium (52)
Denmark (6)
Finland (73)
France (278)
Germany (457)
Greece (16)
Italy (235)
Luxembourg (47)
Netherlands (69)
Norway (1)
Portugal (26)
Spain (184)
Sweden (131)
Switzerland (2)
United Kingdom (196)

Advanced search

Search projects and results

Results 1 - 10 of 547
Order by: Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: 7215-PP/067
Start date: 2001-07-01, End date: 2004-06-30
The overall aim of the project is to develop and to test in industrial conditions a pilot system based on advanced optical and non-contact ultrasonic techniques able to characterise on-line the weld quality as well as to improve the control of laser welding. The techniques wil...
Programme: ECSC-STEEL C
Record Number: 66672
Last updated on: 2002-12-13
ID: 7210-PR/015
Start date: 1997-07-01, End date: 2000-12-31
Previous trials in alloying liquid steel during continuous casting have not led to industrial applications despite encouraging metallurgical results. This research project will completely reconsider this question from both theoretical and practical points of view. Three techni...
Programme: ECSC-STEEL C
Record Number: 66741
Last updated on: 2002-12-13
ID: 7210-PR/029
Start date: 1997-07-01, End date: 2000-12-31
This project aims to enhance the control of coating thickness in galvanising lines. The research work will be directed in particular at: - correcting the cross-bow defect of the strip passing in front of the nozzles of the wiping device by an on-line control system acting on t...
Programme: ECSC-STEEL C
Record Number: 66755
Last updated on: 2002-12-13
ID: 7210-PR/282
Start date: 2001-07-01, End date: 2004-06-30
The objectives of the project are to improve the coating homogeneity and the cooling rate after wiping to guarantee a very homogeneous coating thickness all along the strip in order to ensure uniform sheet properties. The first objective will be realised by two actions, optimi...
Programme: ECSC-STEEL C
Record Number: 66541
Last updated on: 2002-12-13
ID: 7210-PR/205
Start date: 2000-07-01, End date: 2003-06-30
The objective of the project is to develop a technique for assessing the scrap density charged in the EAF. Parameters will be put in relationship with the scrap behaviour in the furnace in order to optimise the charging practice. The work will be performed at the scrap yard di...
Programme: ECSC-STEEL C
Record Number: 66422
Last updated on: 2002-12-13
ID: 7210-PR/075
Start date: 1998-07-01, End date: 2001-12-31
The main goal of this project is to promote a working practice for EAF which minimises the intermediate stops and the power off time in order to favour an efficient use of the energy input and a direct tapping procedure. Application of the appropriate sensors and measurements ...
Programme: ECSC-STEEL C
Record Number: 66813
Last updated on: 2002-12-13
ID: 7210-PR/143
Start date: 1999-07-01, End date: 2002-06-30
This proposal aims to develop new and more sensitive techniques in order to understand and quantify the effect: (i) of additional (or residual) elements in steels and (ii) additional reactive gases in the atmosphere during annealing. The project combines in-situ and ex-situ su...
Programme: ECSC-STEEL C
Record Number: 66870
Last updated on: 2002-12-13
ID: 7210-PR/341
Start date: 2002-07-01, End date: 2005-06-30
Gas-jet wiping is a key operation in hot dip coating, which determinates the homogeneity of the coated product properties and its performance in use. In the frame of this project, the improvement of wiping will be approached by complementary ways: The development of specific i...
Programme: ECSC-STEEL C
Record Number: 66600
Last updated on: 2002-12-13
ID: 7210-PR/347
Start date: 2002-07-01, End date: 2005-12-31
The aim of this project is to establish a metallurgical based simulation system to allow a prediction of the microstructure and the mechanical properties as a function of chemical composition and processing parameters. The project is focussed on high-strength thin sheet grades...
Programme: ECSC-STEEL C
Record Number: 66606
Last updated on: 2002-12-13
ID: 7210-TS/808
Start date: 1996-10-01, End date: 2000-03-31
The overall objective of this project is to gain a greater understanding of galvannealed products and to improve 'on-line' production control. Two approaches will be adopted in the research work: a "mechanical method that will evaluate the application properties of galvanneale...
Programme: ECSC-STEEL C
Record Number: 66930
Last updated on: 2002-12-13
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-11-24
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top