Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Belgium (3)
France (13)
Germany (13)
Italy (11)
Luxembourg (4)
Netherlands (3)
Spain (1)
United Kingdom (7)

Advanced search

Search projects and results

Results 1 - 10 of 40
Order by: Results/page:
12 3 4 > 
ID: 7215-EA/301
Start date: 1984-12-15, End date: 1987-12-14
Programme: ECSC-STEELDEM 1C
Record Number: 66802
Last updated on: 2002-12-19
ID: 7215-EA/102
Start date: 1985-01-01, End date: 1987-12-31
Programme: ECSC-STEELDEM 1C
Record Number: 66800
Last updated on: 2002-12-19
ID: 7215-EA/103
Start date: 1985-01-01, End date: 1987-12-31
Programme: ECSC-STEELDEM 1C
Record Number: 66801
Last updated on: 2002-12-19
ID: 7215-CA/301
Start date: 1985-07-10, End date: 1988-01-09
Programme: ECSC-STEELDEM 1C
Record Number: 66798
Last updated on: 2002-12-19
ID: 7215-EB/502
Start date: 1986-07-01, End date: 1990-06-30
The aim of the project is to test on an industrial scale the quenching and self-tempering of steel beams with a high yield point and high toughness in which good weldability is looked for. The following work will be undertaken: 1. Laboratory studies. This phase will mainly be...
Programme: ECSC-STEELDEM 1C
Record Number: 7292
Last updated on: 2002-12-13
ID: 7215-EA/401
Start date: 1986-01-01, End date: 1986-12-31
This project is an in-plant sequel to the research carried out at CSM with the financial assistance of the ECSC. For the purposes of the project, a sulphuric-acid pickling line will be shut down and adapted to the DEN process. IN order to ensure optimum pickling and to take ac...
Programme: ECSC-STEELDEM 1C
Record Number: 7298
Last updated on: 2002-12-13
ID: 7215-EB/301
Start date: 1986-07-01, End date: 1989-06-30
The aim of the project is to construct and test a new type of universal planetary rolling mill for the rolling of blooms in rod mills. Previous universal planetary rolling mills have consisted of horizontal and vertical rolls. This arrangement often leads to edging defects. Th...
Programme: ECSC-STEELDEM 1C
Record Number: 7295
Last updated on: 2002-12-13
ID: 7215-CB/801
Start date: 1987-12-01, End date: 1989-05-31
This project aims to develop a more efficient process, in terms of productivity and quality, of rapid cooling at the exit of the rolling mill for different section shapes. This will involve water spray cooling or total immersion at a constant temperature.
Programme: ECSC-STEELDEM 1C
Record Number: 7300
Last updated on: 2002-12-13
ID: 7215-GB/101
Start date: 1986-07-01, End date: 1989-06-30
The aim of the project is to develop and test a pilot testing plant using an eddy current process by means of which an objective picture can be built up of defects in the slab surface using data on the position, size and depth of the defects. The unit would be used on-line on ...
Programme: ECSC-STEELDEM 1C
Record Number: 7287
Last updated on: 2002-12-13
ID: 7215-EA/104
Start date: 1984-08-01, End date: 1988-03-31
This proposed research is an extension of project N° 7210-EA/104 entitled: "Improvement of strip flatness in tandem mills and skin-pass mill stands by means of axially movable rolls with special camber". The aim of the present work is to apply measurements of tension across th...
Programme: ECSC-STEELDEM 1C
Record Number: 7299
Last updated on: 2002-12-13
12 3 4 > 
List retrieved on: 2017-11-22
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top