Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Belgium (4)
Denmark (3)
France (16)
Germany (26)
Italy (10)
Luxembourg (4)
Netherlands (12)
Spain (7)
Sweden (2)
United Kingdom (15)

Advanced search

Search projects and results

Results 1 - 10 of 77
Order by: Results/page:
12 3 4 5 6 7 8 > 
ID: 7215-TP/202
Start date: 1991-06-01, End date: 1994-05-31
The first phase of the project is intended to test principles for modifying a galvannealing line, on a pilot line and through measurements made on an industrial line, with a view to optimising and controlling the coating composition. This modification will be achieved mainly b...
Programme: ECSC-STEELDEM 3C
Record Number: 7280
Last updated on: 2002-12-13
ID: 7215-CA/202
Start date: 1992-07-01, End date: 1995-06-30
The aim of this pilot project is to test a new concept of continuous casting machine in which the upper side of the mould is extended by a refractory tube connected directly to the lower part of the tundish in order to locate the steel meniscus, variations of which are the roo...
Programme: ECSC-STEELDEM 3C
Record Number: 7309
Last updated on: 2002-12-13
ID: 7215-EB/103
Start date: 1993-07-01, End date: 1996-06-30
This multipartner project will install a device on a BOF convertor, which is capable of continuously measuring temperature using pyrometry techniques as well as analysing the carbon and phosphorus contents of the liquid metal. Excitation will be based on laser beam techniques....
Programme: ECSC-STEELDEM 3C
Record Number: 66648
Last updated on: 2002-12-13
ID: 7215-AA/203
Start date: 1995-07-01, End date: 1999-06-30
The objective of this project is to design, implement and test at pilot scale a novel technology for producing low sulphur sponge iron in a stationary bed using coal as a reducing agent and limestone or lime as a desulphurising agent. The new process is based on a rotary heart...
Programme: ECSC-STEELDEM 3C
Record Number: 28897
Last updated on: 2002-12-13
ID: 7215-AA/201
Start date: 1991-12-01, End date: 1994-11-30
This project will demonstrate on a small commercial blast furnace (600 tonnes/day) the possibility of injecting up to 400 kg/tonne of coal in conjunction with a cold blast with 60% or more oxygen content. The advantages, which are sought are a reduction in investment costs (no...
Programme: ECSC-STEELDEM 3C
Record Number: 7328
Last updated on: 2002-12-13
ID: 7215-AA/304
Start date: 1995-07-01, End date: 1998-12-31
This project concerns the construction of a demonstration pilot continuous casting machine for billets with assistance by ultrasonics either alone or in combination with other technologies (e.g. through-wall mould lubrication, modular ingot moulds). The primary objective is to...
Programme: ECSC-STEELDEM 3C
Record Number: 28899
Last updated on: 2002-12-13
ID: 7215-EB/931
Start date: 1991-10-01, End date: 1994-09-30
This project will develop an automatic surface quality inspection system for a skin-pass strip, moving at high speed. The system will diagnose defects that are detected relative to the line planning input requirements.
Programme: ECSC-STEELDEM 3C
Record Number: 7290
Last updated on: 2002-12-13
ID: 7215-EB/401
Start date: 1991-07-01, End date: 1994-12-31
The aim of this project is to set up a diagnostic system capable of determining the correct operational state of the mechanical, electrical, and measuring equipment of a hot strip rolling mill. The final objective is to be able to identify the reasons for breakdowns or reducti...
Programme: ECSC-STEELDEM 3C
Record Number: 7294
Last updated on: 2002-12-13
ID: 7215-EB/932
Start date: 1992-07-01, End date: 1995-06-30
The main objective of the project is the design, development and implementation of an automatic system to examine, diagnose and control the state of metallic cables of heavy cranes and lifts where the safety of persons is involved. The system will detect, identify and classify...
Programme: ECSC-STEELDEM 3C
Record Number: 7291
Last updated on: 2002-12-13
ID: 7215-CA/404
Start date: 1991-04-01, End date: 1993-03-31
This project is intended to develop the Terni installation, which was constructed under contract 7215-CA/402, in order to increase casting capacity and achieve stable casting conditions: 15 tonne ladle, casting time 20-60 minutes. A rolling mill capable of performing in-line t...
Programme: ECSC-STEELDEM 3C
Record Number: 7305
Last updated on: 2002-12-13
12 3 4 5 6 7 8 > 
List retrieved on: 2017-11-24
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top