Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Belgium (7)
France (7)
Germany (27)
Italy (15)
Luxembourg (4)
Netherlands (7)
United Kingdom (13)

Advanced search

Search projects and results

Results 1 - 10 of 83
Order by: Results/page:
12 3 4 5 6 7 8 9 > 
ID: 7210-SA/203
Start date: 1985-10-01, End date: 1987-10-31
Architects, no-professional decision makers and investors need guidelines covering the major aspects of fire safety, especially for steel constructions, which are explained and accessible. For this audience, available literature is not easy to understand and does not provide a...
Programme: ECSC-STEELRES 6C
Record Number: 14221
Last updated on: 2002-12-13
ID: 7210-KG/102
Start date: 1984-07-01, End date: 1987-06-30
Full-size tubular nodes, either welded or of a composite cast steel/plate design, will be investigated as a logical continuation of previous studies on test bars. These tests will be carried out mainly under random sea state stress sequences in artificial sea-water. The aim is...
Programme: ECSC-STEELRES 6C
Record Number: 6862
Last updated on: 2002-12-13
ID: 7210-KA/810
Start date: 1985-10-01, End date: 1988-03-31
RESISTANCE SPOT WELDING IS ONE OF THE MOST WIDELY EMPLOYED PROCESSES IN THE MASS PRODUCTION INDUSTRIES FOR THE JOINING OF THIN SHEET. IN SPITE OF THIS THERE IS LIMITED STANDARDIZATION REGARDING QUALITY CONTROL PROCEDURES, ASSESSMENT OF WELD QUALITY AND MEASUREMENT OF WELDING P...
Programme: ECSC-STEELRES 6C
Record Number: 14211
Last updated on: 1994-01-23
ID: 7210-GF/306
Start date: 1985-07-01, End date: 1988-06-30
THE EMERGENCE OF ARRAYS OF X-RAY-SENSITIVE PHOTOSENSORS IS MAKING IT POSSIBLE TO DESIGN A NEW GENERATION OF GAUGES FOR MEASURING THE THICKNESS PROFILE OF HOT-AND COLD-ROLLED STRIP. IN COMPARISON WITH CURRENT PRACTICE - IN WHICH AT BEST THE RADIATION SOURCE, OR AT WORST THE SO...
Programme: ECSC-STEELRES 6C
Record Number: 14217
Last updated on: 1994-01-23
ID: 7210-GF/602
Start date: 1985-07-01, End date: 1989-06-30
STUDY AND RESEARCH AIMED AT DEVELOPING VALID SELECTION CRITERIA FOR THE ACQUISITION OR CONSTRUCTION OF DATA RECORDING AND PROCESSING EQUIPMENT. THIS RESEARCH WILL BE SO CONDUCTED AS TO LEAD TO A STANDARD FORMULATION OF DEFINITIONS FOR THE CHARACTERIZATION OF MATERIALS USED IN ...
Programme: ECSC-STEELRES 6C
Record Number: 14219
Last updated on: 1994-01-23
ID: 7210-GB/103
Start date: 1984-07-01, End date: 1988-06-30
THIS PROJECT IS A FOLLOW-UP TO TWO EARLIER CONTRACTS (7210.GA/120 AND 7210.GA/810) IN THE SAME FIELD. THE AIM IS TO DEVELOP A MEASURING METHOD TO DETERMINE INTERNAL MECHANICAL STRESSES IN ROLLED AND FORGED PRODUCTS. INTERNAL STRESSES, WHICH WILL BE ANALYSED SOLELY BY AN ULTRA...
Programme: ECSC-STEELRES 6C
Record Number: 13883
Last updated on: 1994-01-23
ID: 7210-AA/209
Start date: 1985-10-01, End date: 1989-09-30
ALL BLAST-FURNACE OPERATORS AGREE THAT THE COHESIVE ZONE IS CRITICAL IN THE PERFORMANCE OF A BLAST FURNACE. THE AIM OF THIS RESEARCH IS TO SEEK WAYS AND MEANS OF OPTIMIZING THE SHAPE AND POSITION OF THE COHESIVE ZONE.
Programme: ECSC-STEELRES 6C
Record Number: 13920
Last updated on: 1994-01-23
ID: 7210-EA/212
Start date: 1985-07-01, End date: 1988-06-30
THE AIM OF THE RESEARCH IS TO IMPROVE THE DIMENSIONAL QUALITY OF THE BUTT-ENDS OF STRIP PRODUCED IN CONTINUOUS HOT-ROLLING MILLS.
Programme: ECSC-STEELRES 6C
Record Number: 13893
Last updated on: 1994-01-23
ID: 7210-EB/402
Start date: 1985-07-01, End date: 1988-06-30
CONTINUOUS CASTING IS BEING USED INCREASINGLY IN THE PRODUCTION OF CARBON AND ALLOYED STRUCTURAL STEELS SUPPLIED IN THE FORM OF ROLLED BARS FOR APPLICATIONS IN THE MOTOR VEHICLES AND GENERAL ENGINEERING SECTORS. INTERNAL AND SURFACE QUALITY REQUIREMENTS ARE PARTICULARLY STRING...
Programme: ECSC-STEELRES 6C
Record Number: 13887
Last updated on: 1994-01-23
ID: 7210-GD/205
Start date: 1985-07-01, End date: 1988-06-30
OVER THE LAST 20 YEARS, REMARKABLE PROGRESS HAS BEEN MADE IN THE COLD-ROLLING SECTOR. ONE OF THE REASONS FOR SUCH PROGRESS IS THE INCREASING ATTENTION THAT HAS BEEN DEVOTED TO THE PREPARATION OF ROLLING EMULSIONS. WITH THE NEED TO MEET INCREASINGLY STRINGENT REQUIREMENTS, TH...
Programme: ECSC-STEELRES 6C
Record Number: 13882
Last updated on: 1994-01-23
12 3 4 5 6 7 8 9 > 
List retrieved on: 2017-11-18
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top