Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Austria (14)
Belgium (75)
Denmark (7)
Finland (8)
France (139)
Germany (264)
Greece (8)
Italy (138)
Luxembourg (30)
Netherlands (65)
Portugal (25)
Spain (119)
Sweden (18)
United Kingdom (131)

Advanced search

Search projects and results

Results 1 - 10 of 769
Order by: Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: 7210-AA/213
Start date: 1991-12-01, End date: 1994-11-30
This research is intended to investigate the possibilities of compacting certain sinter constituent materials without any loss of sinter quality, thus allowing fine and ultra-fine materials, dusts and sludges or cheaper constituents to be recycled, with ensuing positive enviro...
Programme: ECSC-STEELRES 8C
Record Number: 7622
Last updated on: 2002-12-13
ID: 7210-AA/216
Start date: 1992-07-01, End date: 1994-06-30
The aim of this project is to make a systematic study of the various factors which can modify the nature of unburnt coal residues which remain under conditions of high coal injection rates in the blast furnace and to examine their reactions with primary slag and iron and to as...
Programme: ECSC-STEELRES 8C
Record Number: 7620
Last updated on: 2002-12-13
ID: 7210-AA/215
Start date: 1992-07-01, End date: 1995-06-30
In the conventional steel-making route, large amounts of by-product gases are produced. By proper blending, preparation and reheating of these gases, it is possible to obtain a hot reducing gas suitable for bosh injection into the blast furnace and thereby save large amounts o...
Programme: ECSC-STEELRES 8C
Record Number: 7619
Last updated on: 2002-12-13
ID: 7210-AA/933
Start date: 1992-11-01, End date: 1995-10-31
The main aim of this project is to improve an existing model of blast furnace operation so that it may be used as the basis for a real time process control system. Modern control theory, incorporating Kalman filters, will be used in order to define steady state operation and a...
Programme: ECSC-STEELRES 8C
Record Number: 7608
Last updated on: 2002-12-13
ID: 7210-CA/218
Start date: 1991-07-01, End date: 1994-06-30
This research project is intended to predict the occurrence of longitudinal cracks through processing of data logged by an instrumented mould. This information will be used to optimise casting conditions in order to minimize longitudinal cracking. It is intended to define cond...
Programme: ECSC-STEELRES 8C
Record Number: 7596
Last updated on: 2002-12-13
ID: 7210-CB/203
Start date: 1991-07-01, End date: 1994-06-30
The promotion and valorization of BOF slag is the main aim of this collaborative research project. Potential uses in the agricultural and civil engineering domains, especially for the very fine fractions, will be studied. The BOF slag will not be used alone, but in combination...
Programme: ECSC-STEELRES 8C
Record Number: 7576
Last updated on: 2002-12-13
ID: 7210-CB/204
Start date: 1992-07-01, End date: 1995-06-30
In an earlier project sensors were developed to continuously measure the temperature of liquid steel in the ladle and tundish. The aim of this proposal is to apply similar principles to the temperature measurement of the steel in a converter. The method employs several thermoc...
Programme: ECSC-STEELRES 8C
Record Number: 7575
Last updated on: 2002-12-13
ID: 7210-EA/215
Start date: 1992-10-01, End date: 1995-09-30
To get a better understanding of the hot rolling of strips less than 2 mm thick, particularly from the aspect of hot tearing at the edge or centre. To study the mechanism of such tears, how they are caused and ways to reduce them with consequent savings in productivity and qua...
Programme: ECSC-STEELRES 8C
Record Number: 7552
Last updated on: 2002-12-13
ID: 7210-EB/203
Start date: 1992-07-01, End date: 1995-06-30
This project will develop a new method for descaling hot strip using oscillating nozzles with small diameter water jets with the objective of achieving satisfactory scale removal with minimum heat loss and reduced expenditure of energy. Initially a laboratory exercise, the met...
Programme: ECSC-STEELRES 8C
Record Number: 7543
Last updated on: 2002-12-13
ID: 7210-GB/206
Start date: 1992-10-01, End date: 1995-09-30
This project will undertake the design of an industrial system to continuously inspect the surface of finishing rolls in a hot strip mill. The equipment will consist of a probe, a light source and a facility for image capture and analysis. After laboratory design, the unit wil...
Programme: ECSC-STEELRES 8C
Record Number: 7514
Last updated on: 2002-12-13
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2018-01-20
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top