Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Search projects and results

Results 1 - 10 of 82
Order by: Results/page:
12 3 4 5 6 7 8 9 > 
Working towards Mass Manufactured, Low Cost and Robust SOFC stacks
ID: 278525
Start date: 2012-01-01, End date: 2015-06-30
Lightweight SOFC stacks are currently being developed for stationary applications such as residential CHP units, for automotive applications such as APU and for portable devices. They supply electrical efficiencies of up to 60%, a high fuel flexibility, being able to operate ...
Programme: FP7-JTI
Record Number: 101362
Last updated on: 2017-06-05
Robust Advanced Materials for metal Supported SOFC
ID: 256768
Start date: 2011-01-01, End date: 2014-05-31
The RAMSES project aims at developing an innovative high performance, robust, durable and cost-effective Solid Oxide Fuel Cell based on the Metal Supported Cell concept i.e. the deposition of thin ceramic electrodes and electrolyte on a porous metallic substrate. Both planar ...
Programme: FP7-JTI
Record Number: 97939
Last updated on: 2017-05-30
Prefabricated CFRP Parts
[PROJECT] EASYPATCH - Prefabricated CFRP Parts
ID: 270539
Start date: 2010-11-01, End date: 2012-06-30
Due to the increasing use of carbon fibre reinforced plastics (CFRP) in aircraft structures a growing demand for repair concepts can be observed. Today’s repair concepts are mainly focused on the refurbishment of parts at the manufacturer’s site in order to reduce waste. Addi...
Programme: FP7-JTI
Record Number: 101054
Last updated on: 2017-05-29
Sulphur, Carbon, and re-Oxidation Tolerant Anodes and Anode Supports for Solid Oxide Fuel Cells
ID: 256730
Start date: 2010-10-01, End date: 2013-12-31
The project will demonstrate a new full ceramic SOFC cell with superior robustness as regards to sulphur tolerance, carbon deposition (coking) and re-oxidation (redox resistance). Such a cell mitigates three major failure mechanisms which today have to be addressed at the sys...
Programme: FP7-JTI
Record Number: 97936
Last updated on: 2017-05-29
MembrAnEs for STationary application with RObust mechanical properties
ID: 256647
Start date: 2011-01-01, End date: 2014-03-31
Low equivalent weight ionomers are required to reach the membrane conductivity and MEA performance targets for stationary operation and enable stationary PEMFC systems to achieve superior overall system yield to competitive technologies. Perfluorosulfonic acid ionomers (PFSA)...
Programme: FP7-JTI
Record Number: 97929
Last updated on: 2017-05-29
Development of High Temperature Survival Electronic Devices for Engine Control Systems
ID: 255749
Start date: 2010-01-01, End date: 2013-07-31
This proposal is concerned with the development of distributed high temperature electronics platform for integration with sensor elements to provide a high integrity serial digital data link that can be fed into FADEC (Full Authority Digital Electronic Control) and/or EHMS (E...
Programme: FP7-JTI
Record Number: 98024
Last updated on: 2017-05-29
Structural design of a counter-rotating open rotor
ID: 255863
Start date: 2010-01-01, End date: 2011-06-30
In this project two fe-models for counter-rotating open rotors made from composites are needed. Before generating these models a structural design is necessary. IBK is a SME with a long tradition in both structural mechanics and aerodynamics. Consequently our customers come f...
Programme: FP7-JTI
Record Number: 98038
Last updated on: 2017-05-29
STAYERS
Stationary PEM fuel cells with lifetimes beyond five years
ID: 256721
Start date: 2011-01-01, End date: 2014-06-30
Economical use of PEM fuel cell power for stationary applications demands a lifetime of the fuel cells of at least 5 years, or more than 40,000 hours of continuous operation. The prospect of large scale application for automotive use has focused PEM research on low cost produ...
Programme: FP7-JTI
Record Number: 97935
Last updated on: 2017-05-26
Active Pressure, Position and Temperature sensors for Turboshaft engines
ID: 255909
Start date: 2010-04-01, End date: 2012-08-31
ActiPPTSens consortium will established the technology benchmark on smart sensors for pressure, position and temperature measurement, based on the specification of NEWAC, DREAM and TEENI. Sensor technologies and their main features will be analysed and captured into a Sensors...
Programme: FP7-JTI
Record Number: 100899
Last updated on: 2017-05-26
Thermoelectric generator for engine control system
ID: 255853
Start date: 2010-01-01, End date: 2012-12-31
ThetaGen aims to scavenge energy from a turboshaft and convert it in electrical power to feed the engine control unit. It defines and specifies such a power block, benchmarks potential technolgies, develops a demonstrator and prove the concept thru actual measurements on an e...
Programme: FP7-JTI
Record Number: 98053
Last updated on: 2017-05-26
12 3 4 5 6 7 8 9 > 
List retrieved on: 2017-11-24
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top