Community Research and Development Information Service - CORDIS

Search projects and results

Results 1 - 10 of 28
Order by: Results/page:
12 3 > 
Mathematical Methods for Financial Risk Management
ID: 228053
Start date: 2008-12-01, End date: 2013-11-30
Since the pioneering works of Black & Scholes, Merton and Markowitch, sophisticated quantitative methods are being used to introduce more complex financial products each year. However, this exciting increase in the complexity forces the industry to engage in proper risk m...
Programme: FP7-IDEAS-ERC
Record Number: 88807
Last updated on: 2017-05-30
ID: INTAS 2006-1000017-8909
Start date: 2007-02-01, End date: 2008-07-31
Development of a unified approach and software for numerically solving inverse and optimization problems for distributed systems. The project objective is - investigation of the following mathematical problems' statements: - parametric identification; - optimization of paramet...
Programme: IC-INTAS
Record Number: 86189
Last updated on: 2017-03-16
Micro and Nanotechnologies going to Eastern Europe through Networking
ID: 510470
Start date: 2004-05-01, End date: 2006-10-31
The aim of the network MINAEAST-NET is to develop a concerted effort for preparing the participatior of ACC's to projects in FP6 on Micro and Nano Technologies (MNT). The subject involves the priority thematic areas 2. 1ST and 3. NMP. In order to have a unifying idea, the app...
Programme: FP6-NMP
Record Number: 80804
Last updated on: 2015-06-02
CO-ORdination by Best Practice exchange and Knowledge building by the NMP - NCPs in an Enlarged European Research Society
ID: 11800
Start date: 2004-12-01, End date: 2008-11-30
The COOREERS project is proposed by consortium of 25 partners). The project will proceed in 7 work-packages interrelated to each other, 6 of them are focused on improvement of the competencies of the organisations being contact points on national level by networking and best p...
Programme: FP6-NMP
Record Number: 76422
Last updated on: 2012-02-13
Flexible Assembly Systems through Work-place Sharing and Time Sharing Human-Machine Cooperation
ID: 26697
Start date: 2006-09-01, End date: 2010-08-31
The growing number of product variants, smaller lot sizes, accelerated time to market and shorter life-cycles of products have lead to increasing demands on assembly equipment and concepts. They must realise high flexibility related to variants, low cost adaptability of produc...
Programme: FP6-NMP
Record Number: 79907
Last updated on: 2012-02-07
Industrialised, Integrated, Intelligent Construction
ID: 26771
Start date: 2006-10-01, End date: 2010-09-30
Vision: The vision behind I3CON is to enable the transformation towards a European construction industry delivering Industrially produced, Integrated and Intelligent building systems that provide high performance spaces to building-users. I3CON's objective-driven approach: a n...
Programme: FP6-NMP
Record Number: 79909
Last updated on: 2011-10-20
DIagnostic NAnotech and MICrotech Sensors
ID: 26804
Start date: 2007-04-01, End date: 2011-03-31
DINAMICS aims to promote the uptake of nano-technological approaches by developing an integrated cost-effective nano-biological sensor for detection of bioterrorism and environmental assays. The prime deliverable is an exploitable lab-on-a-chip device for detection of pathogen...
Programme: FP6-NMP
Record Number: 81557
Last updated on: 2011-03-31
Novel Therapeutic Strategies for Tissue Engineering of Bone and Cartilage Using Second Generation Biomimetic Scaffolds
ID: 500283
Start date: 2004-10-01, End date: 2010-07-31
The main aim of the proposed network of excellence (Noël) is to combat and overcome fragmentation of European Research on the field of Tissue Engineering of Bone and Cartilage. The network will bring together Europe's leading academic centres and several complementary industri...
Programme: FP6-NMP
Record Number: 74345
Last updated on: 2010-09-08
Advanced nanostructured surfaces for the control of biofouling
ID: 11827
Start date: 2005-03-01, End date: 2010-02-28
All structures in aquatic environments suffer from aggressive biofouling, which is economically costly, and its control imposes environmental burdens through release of biocides. Current non-biocidal coatings are unsuitable for most applications. Hence t here is a 'technology ...
Programme: FP6-NMP
Record Number: 74846
Last updated on: 2010-03-31
Development of an innovative, cost-effective technology to produce halogen-free, high-performance flame retarded poliolefins (flaretpol)
ID: 516998
Start date: 2005-04-01, End date: 2008-09-30
Plastic applications such as indoor elements of vehicles or aircrafts require flame retardancy to improve survivability. Emission of smoke or toxic gases should be also suppressed, making undesirable the use of some of the most efficient flame retardants, brominated compounds,...
Programme: FP6-NMP
Record Number: 80104
Last updated on: 2010-01-22
12 3 > 
List retrieved on: 2017-11-19
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top