Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Belgium (23)
Denmark (1)
France (37)
Germany (15)
Italy (14)
Luxembourg (4)
Netherlands (4)
Portugal (2)
Spain (8)
United Kingdom (15)

Advanced search

Search projects and results

Results 1 - 10 of 115
Order by: Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: 7261-04/499/08
Start date: 1993-01-01, End date: 1994-12-31
The overall objective of the research is to develop a knowledge-based system to improve the control of fume extraction/cleaning plant installations associated with steelworks' extraction systems.
Programme: ECSC-WORKENV 5C
Record Number: 29754
Last updated on: 2001-04-02
ID: 7261-03/437/08
Start date: 1989-01-01, End date: 1992-06-30
The overall objective of this project is to achieve as near as possible complete recycling of toxic metals arising in the fume from electric arc stainless steelmaking, so that there is virtually no release of these pollutants into the environment, and no wastage of important m...
Programme: ECSC-WORKENV 5C
Record Number: 29691
Last updated on: 2001-04-02
ID: 7261-04/487/08
Start date: 1991-10-01, End date: 1994-09-30
The objectives of the proposed programme of work are as follows:- (i) To create a job exposure data-base for major departments in the steel industry but with particular reference to blast furnaces. This is to be established so that it may be directly linked to epidemiological...
Programme: ECSC-WORKENV 5C
Record Number: 29742
Last updated on: 2001-04-02
ID: 7261-04/468/08
Start date: 1990-10-01, End date: 1993-09-30
The main objective is to prevent radioactive material either unauthorised or accidentally being accepted by a steelworks. This will be done by developing and testing detector systems of high sensitivity suitable for use either at the point of entry of the scrap or within the s...
Programme: ECSC-WORKENV 5C
Record Number: 29722
Last updated on: 2001-04-02
ID: 7261-01/457/08
Start date: 1990-10-01, End date: 1993-09-30
The objective of this project is to understand the factors influencing the formation of NOx in regenerative burners and to develop means of reducing NOx production through modifications to burner design or operation, or choice of fuel.
Programme: ECSC-WORKENV 5C
Record Number: 29711
Last updated on: 2001-04-02
ID: 7261-01/507/08
Start date: 1993-12-01, End date: 1995-11-30
The primary objectives of the work were to examine the factors influencing the formation and emission of sulphur compounds and to develop modified operating practices to reduce such emissions during the processing of blast furnace slags in open pits. The investigation was carr...
Programme: ECSC-WORKENV 5C
Record Number: 29761
Last updated on: 2001-04-02
ID: 7261-02/475/03
Start date: 1991-12-01, End date: 1994-11-30
Many processes in the steel industry produce effluent laden with matter in suspension which produces sludge when purified for the purposes of dumping in a natural environment or recycling. These sludges, which are initially in a liquid state, such as when extracted by deslu...
Programme: ECSC-WORKENV 5C
Record Number: 29729
Last updated on: 1995-12-14
ID: 7261-01/508/01
Start date: 1993-12-01, End date: 1996-11-30
The overall objective of the research is to develop improvements to the two methods of treating blast furnace slag which will reduce atmospheric emissions of sulphur compounds. For slag granulation this will entail studies on the design and geometry of the granulating head...
Programme: ECSC-WORKENV 5C
Record Number: 29762
Last updated on: 1995-12-14
ID: 7261-02/461/03
Start date: 1990-12-01, End date: 1992-11-30
The aim of the research project was the design, the testing and validation of a novel pollution peak equalization system upstream of iron-industry and connected activities waste water treatment plants. One selected as a typical study case, the acido-basic wastes from a metal f...
Programme: ECSC-WORKENV 5C
Record Number: 29715
Last updated on: 1995-12-14
ID: 7261-02/513/03
Start date: 1993-12-01, End date: 1996-11-30
The general objective of the project is to draw up a more detailed design, and validate and apply to the iron and steelmaking environment a standardized multi-medium method for measuring VOCs to meet the needs outlined above.
Programme: ECSC-WORKENV 5C
Record Number: 29767
Last updated on: 1995-12-14
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-07-21
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top