Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Country

Anguilla (2)
Austria (116)
Belarus (1)
Belgium (163)
Benin (1)
Bosnia and Herzegovina (1)
Bulgaria (9)
Burkina Faso (1)
Cameroon (1)
Canada (2)
China (1)
Croatia (29)
Cyprus (10)
Czech Republic (55)
Denmark (61)
Estonia (8)
Finland (43)
Former Yugoslav Republic of Macedonia (2)
France (235)
Germany (298)
Greece (58)
Hungary (43)
Iceland (6)
Ireland (39)
Israel (19)
Italy (283)
Jordan (1)
Kenya (2)
Latvia (8)
Liberia (1)
Lithuania (25)
Luxembourg (17)
Malta (4)
Netherlands (162)
Norway (54)
Poland (53)
Portugal (39)
Romania (16)
Russia (4)
Serbia (8)
Slovakia (29)
Slovenia (28)
South Africa (1)
Spain (286)
Sweden (109)
Switzerland (56)
Turkey (16)
Ukraine (3)
United Kingdom (259)

Advanced search

Search projects and results

Results 1 - 10 of 715
Order by: Results/page:
12 3 4 5 6 7 8 9 10 > >| 
FUEL FLEXIBLE, NEAR -ZERO EMISSIONS, ADAPTIVE PERFORMANCE MARINE ENGINE
ID: 634135
Start date: 2015-05-01, End date: 2018-04-30
The project HERCULES-2 is targeting at a fuel-flexible large marine engine, optimally adaptive to its operating environment. The objectives of the HERCULES-2 project are associated to 4 areas of engine integrated R&D:• Improving fuel flexibility for seamless switching...
Programme: H2020-EU.3.4.
Record Number: 196603
Last updated on: 2017-02-14
Development of MODELICA Libraries for ECS and Thermal management architectures
ID: 686783
Start date: 2016-03-01, End date: 2019-02-28
The goal of this project is the development of Modelica libraries (Dymola compatible) to simulate Electrical Environmental Control System (E-ECS) architectures including thermal management perimeter. The efforts will be focused on developing an optimized model to simulate...
Programme: H2020-EU.3.4.5.6.
Record Number: 200828
Last updated on: 2017-02-14
Induction Starter Generator
[PROJECT] ISG - Induction Starter Generator
ID: 685630
Start date: 2016-04-01, End date: 2019-12-31
The objectives of the project Induction Starter Generator (ISG) is to design, develop, manufacture, test and qualify an innovative TRL6 High Voltage Direct Current (HVDC)/Low Voltage Direct Current controlled Starter/Generator (S/G) intended to be installed on the LiFeCraft...
Programme: H2020-EU.3.4.5.3.
Record Number: 200807
Last updated on: 2017-02-14
Power Conversion Units for LifeRCraft demonstrator
ID: 685478
Start date: 2015-12-14, End date: 2019-06-13
The growth of Power Electronics has been driven by the demand for more electrical solutions in a very diverse range of application sectors, including transport electrification, energy generation, transmission and distribution, consumer electronics and lighting, industrial...
Programme: H2020-EU.3.4.5.3.
Record Number: 200805
Last updated on: 2017-02-14
Intelligent Bearing
[PROJECT] iBearing - Intelligent Bearing
ID: 687091
Start date: 2016-03-01, End date: 2018-04-30
Bearing condition monitoring is an important task in any rotary machine application, given that a bearing is a Single Point of Failure that can lead to catastrophic failure of an entire system. A variety of scenarios can arise from a bearing failure, ranging from only a little...
Programme: H2020-EU.3.4.5.6.
Record Number: 200489
Last updated on: 2017-02-14
Modular, scalable, multi-funtional, high power density power controller for electrical taxi
ID: 686509
Start date: 2016-01-01, End date: 2020-03-31
This proposal presented by Indra Sistemas and CEIT jointly, try to answer in the best way the call JTI-CS2-2014-CFP01-SYS-02-02.The referred call and this associated proposal are framed inside of the packet 4.1.2.4 (Modular power controller for advanced landing system) of the...
Programme: H2020-EU.3.4.5.6.
Record Number: 200488
Last updated on: 2017-02-14
CORE NOISE ENGINE TECHNOLOGY
[PROJECT] CORNET - CORE NOISE ENGINE TECHNOLOGY
ID: 686332
Start date: 2016-03-01, End date: 2019-04-30
Lean burn combustor technologies introduced to reduce NOx emissions are proving to be inherently noisier than conventional combustors, generating broadband noise that can be heard external to the aircraft. Without careful design and optimisation, there is a danger the low...
Programme: H2020-EU.3.4.5.5.
Record Number: 200487
Last updated on: 2017-02-14
Airline Maintenance Operations implementation of an E2E Maintenance Service Architecture and its enablers
ID: 681858
Start date: 2015-12-01, End date: 2019-11-30
The AIRMES project focusses on optimising end-to-end maintenance activities within an operator’s environment. It will develop and validate an innovative, state-of-the-art, integrated maintenance service architecture that will be a key step in achieving the goal of no...
Programme: H2020-EU.3.4.5.1.
Record Number: 200486
Last updated on: 2017-02-14
CROR Blade-Out Impact Simulations and Sample Manufacturing
ID: 686813
Start date: 2016-01-01, End date: 2018-06-30
A faced challenge for the CROR concept is to maintain the current level of safety mandated by aviation and certification regulations and to provide blade impact mitigation at the airframe level without resulting in a large weight penalty. This leads to a demanding impact...
Programme: H2020-EU.3.4.5.4.
Record Number: 200389
Last updated on: 2017-02-14
Full Fairing Rotor Head Aerodynamic Design Optimization
ID: 685636
Start date: 2016-03-01, End date: 2020-02-29
The project is aimed on the numerical design optimization and flow analysis of a semi-watertight full fairing rotor head with respect to drag reduction of a compound helicopter configuration, namely the Low Impact, Fast and Efficient Rotorcraft (LifeRCraft) demonstrator. It...
Programme: H2020-EU.3.4.5.3.
Record Number: 200140
Last updated on: 2017-02-14
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-02-27