Service Communautaire d'Information sur la Recherche et le Développement - CORDIS

Les informations sur les projets et maintenant aussi les résumés de rapports Horizon 2020 sont disponibles sur CORDIS. Tous les projets H2020 peuvent être téléchargés depuis le Portail des données ouvertes de l'UE .

My refinements


Download results of this page


Affiner par:

Type de contenu

Projet (27)

Pays

Allemagne (13)
Belgique (8)
Danemark (2)
Espagne (4)
France (10)
Italie (9)
Luxembourg (3)
Pays-Bas (2)
Royaume-Uni (6)

Advanced search

Rechercher des projets et résultats

Results 1 - 10 of 27
Results/page:
12 3 > 
ID: 7215-CB/401
Date de début: 1989-07-01, Date de fin: 1991-06-30
The project aims to construct and commission an integrated pilot plant consisting of a thin slab continuous caster of Mannesmann Röhrenwerke design linked to an induction furnace and a coiler. The main original feature of the plant consists of a progressive reduction of thickn...
Programme: ECSC-STEELDEM 2C
Record Number: 6928
Last updated on: 2002-12-13
ID: 7215-CA/931
Date de début: 1989-07-01, Date de fin: 1990-06-30
The aim of this project is to develop a computerised expert system to assist in the operation of an electric arc furnace of 105 tons capacity and 80MW of installed power at Bergavia Works. In this preliminary phase, the process will be analysed in terms of metallurgical, energ...
Programme: ECSC-STEELDEM 2C
Record Number: 6930
Last updated on: 2002-12-13
ID: 7215-EA/304
Date de début: 1990-07-01, Date de fin: 1993-06-30
This project has been described under PP157-1. The present budget is related to the second part of the project
Programme: ECSC-STEELDEM 2C
Record Number: 7247
Last updated on: 1993-09-23
ID: 7215-TP/201
Date de début: 1990-04-01, Date de fin: 1993-09-30
The project is iron foil by the applicant's own concerned with the experimental production of patented method-called ELECTROFOIL-based on a technique currently used in the copper industry. A pilot plant similar to an industrial plant but with limited equipment for budgetary re...
Programme: ECSC-STEELDEM 2C
Record Number: 7253
Last updated on: 2002-12-13
ID: 7215-CA/102
Date de début: 1983-12-01, Date de fin: 1987-11-30
The production of these steels and alloys is normally carried out in a vacuum furnace. Casting into conventional mould poses very complex problems with regard to the vacuum or protective atmosphere. In addition, the homogeneity of the ingots is not certain because of segration...
Programme: ECSC-STEELDEM 2C
Record Number: 14343
Last updated on: 2002-12-13
ID: 7215-CA/109
Date de début: 1990-07-01, Date de fin: 1993-06-30
The aim of the project is to investigate, on a laboratory scale, the direct casting of steel strip on a horizontal belt type pilot machine with an upper roll. The capacity of the machine will accept 500 kg heat sizes in order to allow sufficiently stable casting conditions to ...
Programme: ECSC-STEELDEM 2C
Record Number: 18221
Last updated on: 2002-12-13
ID: 7215-CA/932
Date de début: 1990-07-01, Date de fin: 1992-06-30
The project aims to design an Expert System to optimise cast sequencing in continuous casting by monitoring, in real time, the steel plant production programming (converter, ladle metallurgy, continuous casting). The expected benefits should be integrated in a "total quality" ...
Programme: ECSC-STEELDEM 2C
Record Number: 7246
Last updated on: 2002-12-13
ID: 7215-EA/502
Date de début: 1989-07-01, Date de fin: 1991-06-30
After a successful completion of a preceeding pilot project (7215-EB/500) limited to 40 mm flange thickness beams, this project intends to scale-up QST technology to beams with flange-thickness up to and even exceeding 125 mm and a height of 1100 mm. Presently, the yield stren...
Programme: ECSC-STEELDEM 2C
Record Number: 6927
Last updated on: 1994-01-24
ID: 7215-EB/303
Date de début: 1990-10-01, Date de fin: 1993-09-30
The project aims to establish the suitability of a new Cr Mo V steel for the construction of either heavy forging pieces (56 tons) or hyper-heavy plates (150 mm thick), as for their forming, welding and stainless coating in order to characterize their mechanical behaviour at h...
Programme: ECSC-STEELDEM 2C
Record Number: 7251
Last updated on: 2002-12-13
ID: 7215-EB/201
Date de début: 1990-09-01, Date de fin: 1992-08-31
The aim of the project is to apply a new engraving technique used in press printing to the engraving of cold finishing mill and temper mill rolls in order to achieve the appropriate roughness. The anticipated benefits of this new technique compared with existing ones are the f...
Programme: ECSC-STEELDEM 2C
Record Number: 7249
Last updated on: 2002-12-13
12 3 > 
List retrieved on: 2017-02-26