Service Communautaire d'Information sur la Recherche et le Développement - CORDIS

Les informations sur les projets et maintenant aussi les résumés de rapports Horizon 2020 sont disponibles sur CORDIS. Tous les projets H2020 peuvent être téléchargés depuis le Portail des données ouvertes de l'UE .

My refinements


Download results of this page


Affiner par:

Type de contenu

Projet (77)

Pays

Allemagne (26)
Belgique (9)
Danemark (3)
Espagne (7)
France (17)
Italie (13)
Luxembourg (4)
Pays-Bas (12)
Royaume-Uni (15)
Suède (2)

Advanced search

Rechercher des projets et résultats

Results 1 - 10 of 77
Results/page:
12 3 4 5 6 7 8 > 
ID: 7215-AA/401
Date de début: 1992-04-01, Date de fin: 1994-03-31
The objective of this study is to make an exhaustive review of existing and developing technologies and to investigate and evaluate the feasibility of a continuous cycle for steelmaking. The feasibility of that cycle will be designed to achieve high competitiveness of the Euro...
Programme: ECSC-STEELDEM 3C
Record Number: 7325
Last updated on: 1993-09-23
ID: 7215-TP/202
Date de début: 1991-06-01, Date de fin: 1994-05-31
The first phase of the project is intended to test principles for modifying a galvannealing line, on a pilot line and through measurements made on an industrial line, with a view to optimising and controlling the coating composition. This modification will be achieved mainly b...
Programme: ECSC-STEELDEM 3C
Record Number: 7280
Last updated on: 2002-12-13
ID: 7215-EB/401
Date de début: 1991-07-01, Date de fin: 1994-12-31
The aim of this project is to set up a diagnostic system capable of determining the correct operational state of the mechanical, electrical, and measuring equipment of a hot strip rolling mill. The final objective is to be able to identify the reasons for breakdowns or reducti...
Programme: ECSC-STEELDEM 3C
Record Number: 7294
Last updated on: 2002-12-13
ID: 7215-EB/933
Date de début: 1992-07-01, Date de fin: 1995-06-30
The main objective of the project is the design, development and implementation of an automatic system to examine, diagnose and control the state of metallic cables of heavy cranes and lifts where the safety of persons is involved. The system will detect, identify and classify...
Programme: ECSC-STEELDEM 3C
Record Number: 7288
Last updated on: 1994-01-24
ID: 7215-EB/932
Date de début: 1992-07-01, Date de fin: 1995-06-30
The main objective of the project is the design, development and implementation of an automatic system to examine, diagnose and control the state of metallic cables of heavy cranes and lifts where the safety of persons is involved. The system will detect, identify and classify...
Programme: ECSC-STEELDEM 3C
Record Number: 7291
Last updated on: 2002-12-13
ID: 7215-EB/503
Date de début: 1992-07-01, Date de fin: 1995-06-30
The main objective of the project is the design, development and implementation of an automatic system to examine, diagnose and control the state of metallic cables of heavy cranes and lifts where the safety of persons is involved. The system will detect, identify and classify...
Programme: ECSC-STEELDEM 3C
Record Number: 7293
Last updated on: 1994-01-24
ID: 7215-CA/404
Date de début: 1991-04-01, Date de fin: 1993-03-31
This project is intended to develop the Terni installation, which was constructed under contract 7215-CA/402, in order to increase casting capacity and achieve stable casting conditions: 15 tonne ladle, casting time 20-60 minutes. A rolling mill capable of performing in-line t...
Programme: ECSC-STEELDEM 3C
Record Number: 7305
Last updated on: 2002-12-13
ID: 7215-AA/601
Date de début: 1992-07-01, Date de fin: 1994-06-30
The economic evaluation of the replacement of an outdated ironworks with new coal-based direct reduction ironmaking technology has been completed in a preceding contract (7215.BA/601). The technical work has shown that the basic physical and chemical principles of the CCF proc...
Programme: ECSC-STEELDEM 3C
Record Number: 7323
Last updated on: 1993-09-23
ID: 7215-CA/112
Date de début: 1992-07-01, Date de fin: 1998-06-30
This project is intended to construct a pilot line for developing electrolytic deposition of packaging sheet with high corrosion resistance and excellent adherence to the base metal, as well as demonstrating the advantages of employing an organic coating directly extruded afte...
Programme: ECSC-STEELDEM 3C
Record Number: 7311
Last updated on: 2002-12-13
ID: 7215-CA/804
Date de début: 1991-04-01, Date de fin: 1994-03-31
This plant intends to develop methods of applying continuous casting techniques for large blooms at near liquidus temperatures already investigated in research projects 7215- CA/807 and 7210-CA/215. These techniques will be perfected on steels with carbon contents of 0.2 to 0....
Programme: ECSC-STEELDEM 3C
Record Number: 7302
Last updated on: 2002-12-13
12 3 4 5 6 7 8 > 
List retrieved on: 2017-06-24