Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements


Download results of this page


Perfeziona per:

Tipo di contenuto

Progetto (64)
Sintesi della relazione (3)

Paese

Belgio (7)
Francia (15)
Germania (11)
Italia (7)
Lussemburgo (4)
Paesi Bassi (4)
Regno Unito (11)
Spagna (7)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 67
Results/page:
12 3 4 5 6 7 > 
ID: 7250/13/035
Data di inizio: 1993-01-01, Termine: 1994-12-31
The work will be carried out to achieve the following aims: 1. To enable the steel industry to better understand the influence of human behaviour on accident potential. 2. To validate the application in the steel industry of the coal industry's development of a means of as...
Programme: ECSC-ERGONOM 6C
Record Number: 19648
Last updated on: 1994-01-21
ID: 7250/13/011
Data di inizio: 1991-01-01, Termine: 1994-03-31
The project will develop the results of the previous ECSC study 7249/31/009 which considered the ergonomics requirements of a computer based prototype system of information on health and safety known as THESIS. In particular, a section within THESIS will be developed to prov...
Programme: ECSC-ERGONOM 6C
Record Number: 19624
Last updated on: 1994-01-21
In a hot strip mill the continuous casted slabs with a thickness of 210 mm are rolled into hot coils with a thickness between 1.25 mm and 12.5 mm. One of the most important characteristics of the steel strip is its surface quality. The surface quality is inspected on several s...
Programme: ECSC-ERGONOM 6C
Record Number: 20547
Last updated on: 1998-07-08
ID: 7250/13/064
The aim of the project will be the reduction of physical stress associated with laying tracks and pipes during drivage of main gates by developing a mechanical work aid which takes account of the various operational factors.
Programme: ECSC-ERGONOM 6C
Record Number: 19674
Last updated on: 1994-01-21
In mining operations several hundred kilometres of roadway are headed every year. These roadways are mostly equipped with track systems for the purposes of guided haulage. All the tracks are laid manually, (ie in an ergonomically unfavourable posture, which gives rise to extre...
Programme: ECSC-ERGONOM 6C
Record Number: 20548
Last updated on: 1998-07-08
ID: 7250/13/018
Data di inizio: 1992-01-01, Termine: 1994-12-31
The aim of this project is to design and develop, in close cooperation with crane owners, drivers and maintenance personnel, a highly ergonomic crane monitoring system, and then install a pilot version in a steelworks. The system should relieve drivers and maintenance staff of...
Programme: ECSC-ERGONOM 6C
Record Number: 19631
Last updated on: 1994-01-21
ID: 7250/13/054
Data di inizio: 1993-10-01, Termine: 1996-09-30
The project will determine and justify, in as far they relate to operator health and safety, the ergonomic requirements for a proposed new system of visual inspection of the surface quality of hot-rolled coil. On the completion of the installation of the new system it will eva...
Programme: ECSC-ERGONOM 6C
Record Number: 19664
Last updated on: 1994-01-21
The crane monitoring system 'KRANOMAT' has been developed and installed on a mill crane. KRANOMAT carries out the continuous on-line supervision of essential measured data from the plant to recognise dangerous situations and to relieve the crane operators from supervision task...
Programme: ECSC-ERGONOM 6C
Record Number: 20546
Last updated on: 1998-07-08
ID: 7250/12/029
Data di inizio: 1992-01-01, Termine: 1994-12-31
The project will identify the ergonomic requirements of a diagnostic system for use on the casthouse floor to measure the level of hot metal in the torpedo cars and calculate the levels of metal and slag in the blast furnace.
Programme: ECSC-ERGONOM 6C
Record Number: 19642
Last updated on: 1994-01-21
ID: 7250/13/045
Data di inizio: 1993-12-01, Termine: 1993-12-31
The project will concern the ergonomics requirements of the project SACHEM which is an "intelligent" system to aid blast furnace control. The work to be undertaken in the project will be that associated with Stage 2 of the SACHEM project. It will define the associated socio-...
Programme: ECSC-ERGONOM 6C
Record Number: 19656
Last updated on: 1994-01-21
12 3 4 5 6 7 > 
List retrieved on: 2017-12-15