Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements


Download results of this page


Perfeziona per:

Tipo di contenuto

Progetto (79)

Paese

Belgio (6)
Francia (21)
Germania (46)
Regno Unito (25)
Spagna (1)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 79
Results/page:
12 3 4 5 6 7 8 > 
ID: 7258-02/102/01
The main purpose of the project was to check, by means of full-scale fire gallery tests, whether the laboratory and reduced-scale tests prescribed by the German standard (VDE 0472, Part 804) were adequate to assess the fire risk resulting from the use of cables below ground.
Programme: ECSC-MINESAFE 2C
Record Number: 21712
Last updated on: 1994-05-08
ID: 7258-02/080/08
To apply recently developed techniques in sampling methods and gas analysis in order to determine whether any product of spontaneous combustion or ratio of products can be identified which is either complementary to, or superior, to carbon monoxide (CO) as an early and unambig...
Programme: ECSC-MINESAFE 2C
Record Number: 21707
Last updated on: 1994-05-08
ID: 7258-01/075/01
The extension of mechanised methods to the extraction of difficult seams, the concentration of working on fewer, high-capacity, production units and the introduction of automation technology continually influence working methods and conditions in all mining activities. Over th...
Programme: ECSC-MINESAFE 2C
Record Number: 21702
Last updated on: 1994-05-08
ID: 7258-02/081/08
The aim was to develop a control system for the continuous monitoring of mine air samples, from roads where belt conveyors are installed or from single entry roads, which would provide for the instantaneous detection and location of open fires and spontaneous combustion.
Programme: ECSC-MINESAFE 2C
Record Number: 21708
Last updated on: 1994-05-08
ID: 7258-02/098/08
The aim of the project was to establish agreed criteria and test procedures for the fire testing of large items of non-metallic materials in three existing fire galleries: that of British Coal, at their Yorkshire Research Laboratories (YRL), the Buxton gallery of the Health an...
Programme: ECSC-MINESAFE 2C
Record Number: 21711
Last updated on: 1994-05-08
ID: 7258-05/127/03
A previous contract (7255-16/065/03) had shown that a radio link could be established without waveguides between the workers in a production district. It became clear that a system linking all production districts and a base station could improve working conditions and speed...
Programme: ECSC-MINESAFE 2C
Record Number: 21759
Last updated on: 1994-05-08
ID: 7258-01/095/01
The project was directed towards producing mine plans which are in colour, easily readable and which would meet the needs of higher operating performances and enhanced safety.
Programme: ECSC-MINESAFE 2C
Record Number: 21704
Last updated on: 1994-05-08
ID: 7258-03/115/02
The method of taking and analysing mine road dust samples in order to determine the ratio of inert dust (the neutralisation ration) varies between countries. The aim of the project was to compare different methods of sampling and analysing roadway dusts.
Programme: ECSC-MINESAFE 2C
Record Number: 21736
Last updated on: 1994-05-08
ID: 7258-03/108/03
The aim of the project was to obtain the frictional ignition characteristics of the seams in Lorraine, to develop a new pick and water spray system and to carry out frictional ignition trials in a surface gallery.
Programme: ECSC-MINESAFE 2C
Record Number: 21735
Last updated on: 1994-05-08
ID: 7258-02/097/01
The present project sought to establish ventilation speeds, the weight and construction of the wood fire source and temperature measuring techniques.
Programme: ECSC-MINESAFE 2C
Record Number: 21710
Last updated on: 1994-05-08
12 3 4 5 6 7 8 > 
List retrieved on: 2017-07-23