Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements


Download results of this page


Perfeziona per:

Tipo di contenuto

Progetto (547)

Paese

Austria (89)
Belgio (176)
Danimarca (6)
Finlandia (73)
Francia (279)
Germania (457)
Grecia (16)
Italia (235)
Lussemburgo (47)
Norvegia (1)
Paesi Bassi (69)
Portogallo (26)
Regno Unito (196)
Spagna (202)
Svezia (133)
Svizzera (2)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 547
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
ID: 7210-TS/106
Data di inizio: 1996-07-01, Termine: 1999-06-30
Much work has been carried out by the steel industry to develop a corrosion test, which is able to simulate the long-term corrosion behaviour of polymer- coated zinc and steel surfaces. These investigations have been of limited success due to a lack of understanding of the man...
Programme: ECSC-STEEL C
Record Number: 66974
Last updated on: 2002-12-13
ID: 7215-PP/043
Data di inizio: 1999-07-01, Termine: 2001-06-30
The main objective of this project is the dissemination of the results of the ECSC project: "Application of Steel in Urban Habitat Part Housing" at European level and at national level and to collect the key results and the knowledge acquired into a European short publication ...
Programme: ECSC-STEEL C
Record Number: 66973
Last updated on: 2002-12-13
ID: 7215-PP/042
Data di inizio: 1999-07-01, Termine: 2000-06-30
A complete new Fire Safe Concept has been developed in the ECSC project 7210- SA/522. The aim of this project completed in June 1998, was to achieve a breakthrough in the natural fire safety concept thus leading to safer and more economical steel buildings. This concept based ...
Programme: ECSC-STEEL C
Record Number: 66972
Last updated on: 2002-12-13
ID: 7215-PP/041
Data di inizio: 1999-07-01, Termine: 2002-06-30
Camber is a geometrical defect that causes difficulties in guiding the product and can cause cracks in the tail ends of coils in finishers. Several causes can be the origin of this defect. Camber measurement in rolling mills does not exist, presently. Deviation measurement can...
Programme: ECSC-STEEL C
Record Number: 66971
Last updated on: 2002-12-13
ID: 7215-PP/039
Data di inizio: 1999-07-01, Termine: 2002-06-30
The aim of this research proposal is to diagnose on-line the possible causes of failures of thickness quality in the products manufactured in hot strip mills. This proposal is oriented towards the installation, completion and improvement of a laboratory prototype developed und...
Programme: ECSC-STEEL C
Record Number: 66969
Last updated on: 2002-12-13
ID: 7215-PP/029
Data di inizio: 1999-07-01, Termine: 2001-06-30
To improve the oxidation conditions of injected pulverised coal, different processes, like high oxygen enrichment of the blast and the use of different designs of the injection lances, are applied. In spite of all those measures an ignition directly at the tip of the lance cou...
Programme: ECSC-STEEL C
Record Number: 66959
Last updated on: 2002-12-13
ID: 7215-PP/027
Data di inizio: 1999-07-01, Termine: 2002-06-30
Steel production via the EAF is becoming more and more relevant. During the last years, EAF technology has also been aimed at increasing the productivity by decreasing the specific electric energy consumption. An important route to reach this aim is scrap preheating. Presently...
Programme: ECSC-STEEL C
Record Number: 66957
Last updated on: 2002-12-13
ID: 7215-PP/025
Data di inizio: 1998-07-01, Termine: 2001-06-30
Researches have demonstrated that in case of fire in car parks or in high buildings it is generally not necessary to insulate the steel section (beams and/or columns) to obtain a satisfactory level of safety. In order to fully convince authorities that this kind of buildings n...
Programme: ECSC-STEEL C
Record Number: 66955
Last updated on: 2002-12-13
ID: 7215-PP/024
Data di inizio: 1998-07-01, Termine: 2001-06-30
The project aims at validating, in the field, ventilation techniques using 3D numerical codes for typical iron and steelmaking shops ( blast furnaces, steelmaking plants, coil-coating shops, rolling mills). The main steps foreseen are: choice of numerical codes of interest; ch...
Programme: ECSC-STEEL C
Record Number: 66954
Last updated on: 2002-12-13
ID: 7215-PP/023
Data di inizio: 1998-07-01, Termine: 2001-06-30
The aim of this pilot and demonstration proposal is to develop and to test on- line a prototype of a new generation of optical thickness gauge able to measure the thickness of a plate from 100 to 500 mm with a global uncertainty of 0.1 mm. An optical version of the calliper wi...
Programme: ECSC-STEEL C
Record Number: 66953
Last updated on: 2002-12-13
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-03-28