Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements


Download results of this page


Perfeziona per:

Tipo di contenuto

Progetto (40)

Paese

Belgio (3)
Francia (13)
Germania (13)
Italia (11)
Lussemburgo (4)
Paesi Bassi (3)
Regno Unito (7)
Spagna (1)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 40
Results/page:
12 3 4 > 
ID: 7215-EB/502
Data di inizio: 1986-07-01, Termine: 1990-06-30
The aim of the project is to test on an industrial scale the quenching and self-tempering of steel beams with a high yield point and high toughness in which good weldability is looked for. The following work will be undertaken: 1. Laboratory studies. This phase will mainly be...
Programme: ECSC-STEELDEM 1C
Record Number: 7292
Last updated on: 2002-12-13
ID: 7215-EA/401
Data di inizio: 1986-01-01, Termine: 1986-12-31
This project is an in-plant sequel to the research carried out at CSM with the financial assistance of the ECSC. For the purposes of the project, a sulphuric-acid pickling line will be shut down and adapted to the DEN process. IN order to ensure optimum pickling and to take ac...
Programme: ECSC-STEELDEM 1C
Record Number: 7298
Last updated on: 2002-12-13
ID: 7215-EB/301
Data di inizio: 1986-07-01, Termine: 1989-06-30
The aim of the project is to construct and test a new type of universal planetary rolling mill for the rolling of blooms in rod mills. Previous universal planetary rolling mills have consisted of horizontal and vertical rolls. This arrangement often leads to edging defects. Th...
Programme: ECSC-STEELDEM 1C
Record Number: 7295
Last updated on: 2002-12-13
ID: 7215-CB/801
Data di inizio: 1987-12-01, Termine: 1989-05-31
This project aims to develop a more efficient process, in terms of productivity and quality, of rapid cooling at the exit of the rolling mill for different section shapes. This will involve water spray cooling or total immersion at a constant temperature.
Programme: ECSC-STEELDEM 1C
Record Number: 7300
Last updated on: 2002-12-13
ID: 7215-EA/601
Data di inizio: 1984-09-01, Termine: 1988-12-31
In this process the strip is guided round a cylindrical conductor roll (cathode) surrounded by a cylindrical consumable anode. the distance between the two electrodes is of the order of 20 to 30 mm (minimum energy loss). The guiding principles of this cell are as follows: high...
Programme: ECSC-STEELDEM 1C
Record Number: 7296
Last updated on: 1994-01-24
ID: 7215-GB/101
Data di inizio: 1986-07-01, Termine: 1989-06-30
The aim of the project is to develop and test a pilot testing plant using an eddy current process by means of which an objective picture can be built up of defects in the slab surface using data on the position, size and depth of the defects. The unit would be used on-line on ...
Programme: ECSC-STEELDEM 1C
Record Number: 7287
Last updated on: 2002-12-13
ID: 7215-EA/104
Data di inizio: 1984-08-01, Termine: 1988-03-31
This proposed research is an extension of project N° 7210-EA/104 entitled: "Improvement of strip flatness in tandem mills and skin-pass mill stands by means of axially movable rolls with special camber". The aim of the present work is to apply measurements of tension across th...
Programme: ECSC-STEELDEM 1C
Record Number: 7299
Last updated on: 2002-12-13
ID: 7215-GB/302
Data di inizio: 1987-07-01, Termine: 1989-12-31
The aim of the project is the development of a prototype on-line detection system for surface defects on hot pickled sheet steel at the entry to the cold rolling mill. The approach will be based on optical and Foucault currents.
Programme: ECSC-STEELDEM 1C
Record Number: 7286
Last updated on: 2002-12-13
ID: 7215-UT/101
Data di inizio: 1983-12-01, Termine: 1986-05-31
This proposal concerns the 4th phase of the pilot and demonstration project for production of drink can lids. In the past phases a steel lid of 63 mm diameter was successfully developed up to the production stage. More recently, the aluminium industry has introduced a new but ...
Programme: ECSC-STEELDEM 1C
Record Number: 7278
Last updated on: 2002-12-13
ID: 7215-AB/931
Data di inizio: 1986-07-01, Termine: 1989-06-30
A new-type polyvalent pelletising plant is to be built and tested on a pilot scale. This pilot plant will later be used for a research programme on MgO-containing pellets, the main feature being the use of home-produced iron ore. The object of the proposed financial aid is, ho...
Programme: ECSC-STEELDEM 1C
Record Number: 7321
Last updated on: 2002-12-13
12 3 4 > 
List retrieved on: 2017-09-23