Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements


Download results of this page


Perfeziona per:

Tipo di contenuto

Progetto (27)

Paese

Belgio (8)
Danimarca (2)
Francia (10)
Germania (13)
Italia (9)
Lussemburgo (3)
Paesi Bassi (2)
Regno Unito (6)
Spagna (4)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 27
Results/page:
12 3 > 
ID: 7215-CA/107
Data di inizio: 1989-04-01, Termine: 1991-03-31
The objective of the proposed pilot project is to build and test an on-line analysis system for monitoring and measuring the change in concentration of various elements in liquid steel. The method employed will be laser-induced spectroscopy. The access to the surface of the li...
Programme: ECSC-STEELDEM 2C
Record Number: 6934
Last updated on: 2002-12-13
ID: 7215-GB/303
Data di inizio: 1988-07-01, Termine: 1991-06-30
The aim of this programme is to conceive, achieve and experiment at an industrial scale, an inductive strip edge reheating system on a hot strip mill. The 3MW installed power capacity will allow the transverse thermal homogeneity of the strips in front of the finishing mill to...
Programme: ECSC-STEELDEM 2C
Record Number: 6925
Last updated on: 2002-12-13
ID: 7215-CA/201
Data di inizio: 1989-07-01, Termine: 1991-06-30
The aim of the project is to evaluate the internal and external quality of stainless steel sheets processed on an existing pilot near net shape casting facility. Grade AISE 304 stainless steel (DIN 4301) produced at ALZ will be remelted and continuously cast into 40 mm thick s...
Programme: ECSC-STEELDEM 2C
Record Number: 6932
Last updated on: 2002-12-13
ID: 7215-CA/901
Data di inizio: 1989-04-01, Termine: 1991-03-31
The aim of the project is to develop and operate, on an industrial scale, a new-design electric arc furnace with an attached shaft for continuous scrap loading and scrap preheating. The hot waste gases from the furnace will be sucked through the scrap column of the pre-heater ...
Programme: ECSC-STEELDEM 2C
Record Number: 6931
Last updated on: 2002-12-13
ID: 7215-GB/201
Data di inizio: 1988-07-01, Termine: 1990-06-30
It is aimed to carry out on-line measurements without any contact between the sensor and the strip surface. The measurement is based on the scattering of a reflected light beam due to the surface roughness. The pilot and demonstration project will aim to improve the layout for...
Programme: ECSC-STEELDEM 2C
Record Number: 6926
Last updated on: 2002-12-13
ID: 7215-EA/502
Data di inizio: 1989-07-01, Termine: 1991-06-30
After a successful completion of a preceeding pilot project (7215-EB/500) limited to 40 mm flange thickness beams, this project intends to scale-up QST technology to beams with flange-thickness up to and even exceeding 125 mm and a height of 1100 mm. Presently, the yield stren...
Programme: ECSC-STEELDEM 2C
Record Number: 6927
Last updated on: 1994-01-24
ID: 7215-TP/201
Data di inizio: 1990-04-01, Termine: 1993-09-30
The project is iron foil by the applicant's own concerned with the experimental production of patented method-called ELECTROFOIL-based on a technique currently used in the copper industry. A pilot plant similar to an industrial plant but with limited equipment for budgetary re...
Programme: ECSC-STEELDEM 2C
Record Number: 7253
Last updated on: 2002-12-13
ID: 7215-CB/401
Data di inizio: 1989-07-01, Termine: 1991-06-30
The project aims to construct and commission an integrated pilot plant consisting of a thin slab continuous caster of Mannesmann Röhrenwerke design linked to an induction furnace and a coiler. The main original feature of the plant consists of a progressive reduction of thickn...
Programme: ECSC-STEELDEM 2C
Record Number: 6928
Last updated on: 2002-12-13
ID: 7215-CA/902
Data di inizio: 1989-04-01, Termine: 1991-03-31
The ultimate aim of the partners in this project, the Danish Steelworks Ltd and Mannesmann Demag Hüttentechnik, is to build and operate a pilot plant for the manufacture of round steel billet in a horizontal and continuously operating spray deposition installation. The aim of ...
Programme: ECSC-STEELDEM 2C
Record Number: 6929
Last updated on: 2002-12-13
ID: 7215-EB/801
Data di inizio: 1990-12-01, Termine: 1993-11-30
The project is to build a continuous annealing pilot line for cold rolled sheets in order to test a new type of transverse flux induction heating capable of heating strip steel to the annealing temperature in a few seconds. This new technique coupled with a fast cooling sectio...
Programme: ECSC-STEELDEM 2C
Record Number: 7252
Last updated on: 2002-12-13
12 3 > 
List retrieved on: 2017-06-25