Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements


Download results of this page


Perfeziona per:

Tipo di contenuto

Progetto (18)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 18
Results/page:
12 > 
Induction Starter Generator
[PROGETTO] ISG - Induction Starter Generator
ID: 685630
Data di inizio: 2016-04-01, Termine: 2019-12-31
The objectives of the project Induction Starter Generator (ISG) is to design, develop, manufacture, test and qualify an innovative TRL6 High Voltage Direct Current (HVDC)/Low Voltage Direct Current controlled Starter/Generator (S/G) intended to be installed on the LiFeCraft...
Programme: H2020-EU.3.4.5.3.
Record Number: 200807
Last updated on: 2017-02-14
Power Conversion Units for LifeRCraft demonstrator
ID: 685478
Data di inizio: 2015-12-14, Termine: 2019-06-13
The growth of Power Electronics has been driven by the demand for more electrical solutions in a very diverse range of application sectors, including transport electrification, energy generation, transmission and distribution, consumer electronics and lighting, industrial...
Programme: H2020-EU.3.4.5.3.
Record Number: 200805
Last updated on: 2017-02-14
Full Fairing Rotor Head Aerodynamic Design Optimization
ID: 685636
Data di inizio: 2016-03-01, Termine: 2020-02-29
The project is aimed on the numerical design optimization and flow analysis of a semi-watertight full fairing rotor head with respect to drag reduction of a compound helicopter configuration, namely the Low Impact, Fast and Efficient Rotorcraft (LifeRCraft) demonstrator. It...
Programme: H2020-EU.3.4.5.3.
Record Number: 200140
Last updated on: 2017-02-14
Helicopter Engine Air Intake OPtimization Tool
ID: 686852
Data di inizio: 2016-01-04, Termine: 2017-07-03
The objective of this topic is to set up an industrial and fully automatic optimal design tool, integrating software identified by the Topic Leader, in order to reach TRL6 at the end of the project. This tool has to be dedicated to rotorcraft engine air intake analysis and...
Programme: H2020-EU.3.4.5.3.
Record Number: 199611
Last updated on: 2017-02-14
Support to aerodynamic analysis and design of propellers of a compound helicopter
ID: 685569
Data di inizio: 2015-12-01, Termine: 2019-03-31
PROPTER addresses the analysis and design of propellers operating in the complex flow field around a compound helicopter where a strong interaction with airframe and lifting rotor occurs. The objectives are well-thought out to ensure (i) sound understanding of the physics of...
Programme: H2020-EU.3.4.5.3.
Record Number: 199578
Last updated on: 2017-02-14
Comprehensive Aerodynamic-Aeroacoustic Analysis of a Trimmed Compound Helicopter
ID: 686530
Data di inizio: 2015-12-01, Termine: 2019-11-30
CA³TCH considers the full external aerodynamic behaviour of a compound rotorcraft to be developed. Aerodynamics -- and aeroacoustics as well -- have to be investigated by full-featured simulations including coupling to structural simulation and flight mechanics. This...
Programme: H2020-EU.3.4.5.3.
Record Number: 199448
Last updated on: 2017-02-14
Distribution and Gauging Interconnected Fuel System for the Next Generation Civil Tilt Rotor
ID: 717069
Data di inizio: 2016-12-01, Termine: 2021-11-30
Secondo Mona, an established Italian aerospace SME with over 100 years of contributions to the aerospace industry, proposes to design, develop, test and qualify a high reliability integrated Fuel Gauging and Distribution System (DIGIFuel), providing active CG management, for...
Programme: H2020-EU.3.4.5.3.
Record Number: 206562
Last updated on: 2017-02-14
A.dditive MA.nufacturing for T.iltrotor HO.using
ID: 717194
Data di inizio: 2016-12-01, Termine: 2021-11-30
AMATHO (A.dditive MA.nufacturing T.iltrotor HO.using) is aimed to design, assess and manufacture a novel tiltrotor drive system housing exploiting the features of additive manufacturing techniques. Preliminarily, functional, structural and technological peculiarities of...
Programme: H2020-EU.3.4.5.3.
Record Number: 206580
Last updated on: 2017-02-14
High Speed HVDC Generator / Motor
[PROGETTO] HVDCGEN - High Speed HVDC Generator / Motor
ID: 738072
Data di inizio: 2017-03-01, Termine: 2022-08-31
The scope of the topic is to design, develop; test and flight qualify a high speed / high voltage direct current (HVDC) generator system with an integral motor function to be installed onto the Next Generation Civil Tilt Rotor.The Denis Ferranti Group addresses this scope...
Programme: H2020-EU.3.4.5.3.
Record Number: 208210
Last updated on: 2017-02-09
INnovative SmarT Electric Power Distribution
ID: 738064
Data di inizio: 2017-02-01, Termine: 2022-07-31
The INSTEP Consortium will bring together their world-leading expertise in aircraft Electrical Power Systems (EPS) and Power Electronics (PE) in order to design, develop, manufacture, test and provide qualification for flight of an innovative Power Distribution Units (PDUs)...
Programme: H2020-EU.3.4.5.3.
Record Number: 208064
Last updated on: 2017-01-26
12 > 
List retrieved on: 2017-02-26