Servizio Comunitario di Informazione in materia di Ricerca e Sviluppo - CORDIS

Le informazioni sui progetti di Orizzonte 2020 e ora anche le relative sintesi delle relazioni sono disponibili su CORDIS. Tutti i progetti H2020 possono essere scaricati dal Portale Open Data dell'UE .

My refinements


Download results of this page


Perfeziona per:

Paese

Belgio (9)
Danimarca (3)
Francia (17)
Germania (26)
Italia (13)
Lussemburgo (4)
Paesi Bassi (12)
Regno Unito (15)
Spagna (7)
Svezia (2)

Advanced search

Cerca progetti e risultati

Results 1 - 10 of 77
Order by: Results/page:
12 3 4 5 6 7 8 > 
ID: 7215-TP/202
Data di inizio: 1991-06-01, Termine: 1994-05-31
The first phase of the project is intended to test principles for modifying a galvannealing line, on a pilot line and through measurements made on an industrial line, with a view to optimising and controlling the coating composition. This modification will be achieved mainly b...
Programme: ECSC-STEELDEM 3C
Record Number: 7280
Last updated on: 2002-12-13
ID: 7215-EB/401
Data di inizio: 1991-07-01, Termine: 1994-12-31
The aim of this project is to set up a diagnostic system capable of determining the correct operational state of the mechanical, electrical, and measuring equipment of a hot strip rolling mill. The final objective is to be able to identify the reasons for breakdowns or reducti...
Programme: ECSC-STEELDEM 3C
Record Number: 7294
Last updated on: 2002-12-13
ID: 7215-EB/932
Data di inizio: 1992-07-01, Termine: 1995-06-30
The main objective of the project is the design, development and implementation of an automatic system to examine, diagnose and control the state of metallic cables of heavy cranes and lifts where the safety of persons is involved. The system will detect, identify and classify...
Programme: ECSC-STEELDEM 3C
Record Number: 7291
Last updated on: 2002-12-13
ID: 7215-CA/404
Data di inizio: 1991-04-01, Termine: 1993-03-31
This project is intended to develop the Terni installation, which was constructed under contract 7215-CA/402, in order to increase casting capacity and achieve stable casting conditions: 15 tonne ladle, casting time 20-60 minutes. A rolling mill capable of performing in-line t...
Programme: ECSC-STEELDEM 3C
Record Number: 7305
Last updated on: 2002-12-13
ID: 7215-CA/112
Data di inizio: 1992-07-01, Termine: 1998-06-30
This project is intended to construct a pilot line for developing electrolytic deposition of packaging sheet with high corrosion resistance and excellent adherence to the base metal, as well as demonstrating the advantages of employing an organic coating directly extruded afte...
Programme: ECSC-STEELDEM 3C
Record Number: 7311
Last updated on: 2002-12-13
ID: 7215-CA/804
Data di inizio: 1991-04-01, Termine: 1994-03-31
This plant intends to develop methods of applying continuous casting techniques for large blooms at near liquidus temperatures already investigated in research projects 7215- CA/807 and 7210-CA/215. These techniques will be perfected on steels with carbon contents of 0.2 to 0....
Programme: ECSC-STEELDEM 3C
Record Number: 7302
Last updated on: 2002-12-13
ID: 7215-TP/403
Data di inizio: 1991-07-01, Termine: 1993-06-30
The aim of this project is to construct an initial prototype of a completely automatic, X- ray goniometer, intended to measure grain size in polycrystalline steels such as drawing, magnetic and stainless steels as a function of their crystallographic orientation and to optimis...
Programme: ECSC-STEELDEM 3C
Record Number: 7279
Last updated on: 2002-12-13
ID: 7215-CA/110
Data di inizio: 1991-07-01, Termine: 1993-12-31
Much higher frequencies (max 8Hz) can now be applied to the proposed new mould, due to a 60% weight reduction of the moving parts in combination with resonance effects generated by leaf springs and hydraulic actuators. The hydraulic system also allows non- sinusoidal oscillati...
Programme: ECSC-STEELDEM 3C
Record Number: 7312
Last updated on: 2002-12-13
ID: 7215-CA/111
Data di inizio: 1992-07-01, Termine: 1995-06-30
Developed by the proposer, an electromagnetic nozzle can melt down solid, scale- free, semi-finished material and form simultaneously a melt jet, which can be worked up continuously to wire of 0.2 to 3.0mm in diameter. This process can be used to produce wire which is unable t...
Programme: ECSC-STEELDEM 3C
Record Number: 7313
Last updated on: 2002-12-13
ID: 7215-EB/931
Data di inizio: 1991-10-01, Termine: 1994-09-30
This project will develop an automatic surface quality inspection system for a skin-pass strip, moving at high speed. The system will diagnose defects that are detected relative to the line planning input requirements.
Programme: ECSC-STEELDEM 3C
Record Number: 7290
Last updated on: 2002-12-13
12 3 4 5 6 7 8 > 
List retrieved on: 2017-11-19