Wspólnotowy Serwis Informacyjny Badan i Rozwoju - CORDIS

Informacje o projektach programu „Horyzont 2020” , a teraz także streszczenia sprawozdań , są dostępne w serwisie CORDIS. Wszystkie projekty H2020 można pobrać z Portalu Otwartych Danych UE .

My refinements


Download results of this page


Filtruj wg:

Rodzaj treści

Projekt (27)

Advanced search

Wyszukiwanie projektów i wyników

Results 1 - 10 of 27
Results/page:
12 3 > 
ID: 7215-EB/303
Data rozpoczęcia: 1990-10-01, Data zakończenia: 1993-09-30
The project aims to establish the suitability of a new Cr Mo V steel for the construction of either heavy forging pieces (56 tons) or hyper-heavy plates (150 mm thick), as for their forming, welding and stainless coating in order to characterize their mechanical behaviour at h...
Programme: ECSC-STEELDEM 2C
Record Number: 7251
Last updated on: 2002-12-13
ID: 7215-EB/201
Data rozpoczęcia: 1990-09-01, Data zakończenia: 1992-08-31
The aim of the project is to apply a new engraving technique used in press printing to the engraving of cold finishing mill and temper mill rolls in order to achieve the appropriate roughness. The anticipated benefits of this new technique compared with existing ones are the f...
Programme: ECSC-STEELDEM 2C
Record Number: 7249
Last updated on: 2002-12-13
ID: 7215-EA/305
Data rozpoczęcia: 1990-07-01, Data zakończenia: 1992-12-31
The aim of the project is the implementation of an in-line measurement system at the hot stage, of complex cross-section profiles of long products during rolling: rail, pile, beam, by means of a laser light measurement system already developed by the applicant on a laboratory ...
Programme: ECSC-STEELDEM 2C
Record Number: 7248
Last updated on: 2002-12-13
ID: 7215-EA/304
Data rozpoczęcia: 1990-07-01, Data zakończenia: 1993-06-30
This project has been described under PP157-1. The present budget is related to the second part of the project
Programme: ECSC-STEELDEM 2C
Record Number: 7247
Last updated on: 1993-09-23
ID: 7215-CA/803
Data rozpoczęcia: 1990-04-01, Data zakończenia: 1993-03-31
The project aims to go on with the developments started in the contract 7215.CB/804 for the direct casting in a slurry state of steel strip between the rolls of a vertical operating mill. Beyond the development of a new slurry generating system, the project will cope with the ...
Programme: ECSC-STEELDEM 2C
Record Number: 7245
Last updated on: 2002-12-13
ID: 7215-CA/403
Data rozpoczęcia: 1990-04-01, Data zakończenia: 1993-09-30
In the framework of the project, it is proposed to set up, on the tundish of a three-strands bloom caster of DELTA COGNE spa in Aosta, a full-scale system for temperature control by means of a plasma torch of 2 MW capacity. The assessment of the parameters concerning heat tran...
Programme: ECSC-STEELDEM 2C
Record Number: 7244
Last updated on: 2002-12-13
ID: 7215-CA/303
Data rozpoczęcia: 1990-07-01, Data zakończenia: 1992-06-30
The aim of the project is to exploit the following specific characteristics of a d.c. three-electrode arc furnace : - enlarged diameter of the eletrode circle, - single central hot spot, to allow the continuous feeding and melting of fresh scrap in the centre of the furnace. T...
Programme: ECSC-STEELDEM 2C
Record Number: 7243
Last updated on: 2002-12-13
ID: 7215-CA/108
Data rozpoczęcia: 1990-12-01, Data zakończenia: 1993-11-30
The aim of the project is to perform the continuous casting of square blooms of high alloy steels up to the size of 265 mm square on the new two-strands horizontal billet caster of the Siegen plant. The originality of this caster is the synchronous oscillation of the twin moul...
Programme: ECSC-STEELDEM 2C
Record Number: 7242
Last updated on: 2002-12-13
ID: 7215-CA/902
Data rozpoczęcia: 1989-04-01, Data zakończenia: 1991-03-31
The ultimate aim of the partners in this project, the Danish Steelworks Ltd and Mannesmann Demag Hüttentechnik, is to build and operate a pilot plant for the manufacture of round steel billet in a horizontal and continuously operating spray deposition installation. The aim of ...
Programme: ECSC-STEELDEM 2C
Record Number: 6929
Last updated on: 2002-12-13
ID: 7215-EA/502
Data rozpoczęcia: 1989-07-01, Data zakończenia: 1991-06-30
After a successful completion of a preceeding pilot project (7215-EB/500) limited to 40 mm flange thickness beams, this project intends to scale-up QST technology to beams with flange-thickness up to and even exceeding 125 mm and a height of 1100 mm. Presently, the yield stren...
Programme: ECSC-STEELDEM 2C
Record Number: 6927
Last updated on: 1994-01-24
12 3 > 
List retrieved on: 2017-05-27
Śledź nas na: RSS Facebook Twitter YouTube Zarządzany przez Urząd Publikacji UE W górę