Wspólnotowy Serwis Informacyjny Badan i Rozwoju - CORDIS

Informacje o projektach programu „Horyzont 2020” , a teraz także streszczenia sprawozdań , są dostępne w serwisie CORDIS. Wszystkie projekty H2020 można pobrać z Portalu Otwartych Danych UE .

My refinements


Download results of this page


Filtruj wg:

Rodzaj treści

Projekt (541)
Streszczenie raportu (9)

Kraj

Belgia (57)
Dania (1)
Francja (110)
Grecja (7)
Hiszpania (43)
Luksemburg (30)
Niderlandy (26)
Niemcy (149)
Portugalia (8)
Włochy (109)
Zjednoczone Królestwo (121)

Advanced search

Wyszukiwanie projektów i wyników

Results 1 - 10 of 550
Results/page:
12 3 4 5 6 7 8 9 10 > >| 
Within this research project 9 steels of varying strength and toughness have been investigated by different test procedures in order to examine differences in the failure behaviour of high strength steels. A major topic was the investigation concerning the influence of temper...
Programme: ECSC-STEELRES 7C
Record Number: 3711
Last updated on: 1998-03-12
[STRESZCZENIE RAPORTU] Electrochemical immersion sensors
Deoxidation of steel melts by aluminium, manganese or chromium was investigated using the solid electrolyte measuring technique. New types of electrochemical immersion sensors were developed and successfully applied for direct determination of these elements in liquid steel. ...
Programme: ECSC-STEELRES 7C
Record Number: 8787
Last updated on: 1998-03-10
Inductively coupled plasma mass spectrometry (ICP-MS) has become a powerful analytical technique especially for the determination of trace amounts of metals. The applicability of ICP-MS to the analysis of steel samples has been investigated. The analyte ion response can be int...
Programme: ECSC-STEELRES 7C
Record Number: 7667
Last updated on: 2003-01-17
An accelerated expansion test has been developed which gives a good indication of the likely behaviour of low density (LD) slags used as an unbound aggregate. The test produces a result within 24 h. These results were compared with road performance. 3 samples of LD slag were ...
Programme: ECSC-STEELRES 7C
Record Number: 8641
Last updated on: 1998-02-10
In tin plate production, cold rolled strip undergoes alkaline electrodegreasing. After batch annealing, coloured staining of strip edges may be observed. These differences in surface aspect between axis and edges of the strip can be very detrimental to the end product as they ...
Programme: ECSC-STEELRES 7C
Record Number: 8668
Last updated on: 1998-03-18
Research has been concentrated on T91 steels in the form of thick plates and on the behaviour of welds in hydrogen atmospheres. Acceptable properties were confirmed in plates up to 300 mm thick and the weldability was shown to be equivalent to that of 2.25 chromium1molybdenum ...
Programme: ECSC-STEELRES 7C
Record Number: 8672
Last updated on: 1998-03-18
[STRESZCZENIE RAPORTU] Ferritic rolling of ULC steels
Ferritic rolling at low temperature (less than 800 C) in the finishing mill appears to be an economical way to produce a thin and extra soft hot strip. The operating costs can be lowerwhen compared to the conventional austenitic practice. The laboratory studies and the indust...
Programme: ECSC-STEELRES 7C
Record Number: 8667
Last updated on: 1998-03-18
[STRESZCZENIE RAPORTU] Instrumental analysis of ferroalloys
Research was carried out into the development of operating systems for accurate X-ray fluorescence (XRD) analysis of major elements and minor elements in ferroalloys. Samples were prepared following 3 different procedures: obtention of metal samples by remelting in an inductio...
Programme: ECSC-STEELRES 7C
Record Number: 7661
Last updated on: 1998-01-16
Secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS) are used in the study of various metallurgical problems, specifically in areas which utilize the sensitivity, surface specificity or imaging capabilities of these techniques. Research was car...
Programme: ECSC-STEELRES 7C
Record Number: 7324
Last updated on: 1998-01-27
ID: 7210-KD/123
Data rozpoczęcia: 1989-07-01, Data zakończenia: 1992-12-31
The aim of the project is to study, through simulation tests, the microstructural changes that occur during the direct rolling of near net-shape cast microalloyed constructional steels. This will include the solution of microalloying elements and the coarse austenitic structur...
Programme: ECSC-STEELRES 7C
Record Number: 6986
Last updated on: 2002-12-13
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-10-22
Śledź nas na: RSS Facebook Twitter YouTube Zarządzany przez Urząd Publikacji UE W górę