Wspólnotowy Serwis Informacyjny Badan i Rozwoju - CORDIS

Informacje o projektach programu „Horyzont 2020” , a teraz także streszczenia sprawozdań , są dostępne w serwisie CORDIS. Wszystkie projekty H2020 można pobrać z Portalu Otwartych Danych UE .

My refinements

Download results of this page

Filtruj wg:

Advanced search

Wyszukiwanie projektów i wyników

Results 1 - 10 of 12
12 > 
Regional turboprop loads control through active and passive technologies
ID: 686804
Data rozpoczęcia: 2015-12-01, Data zakończenia: 2018-09-30
A number of active and passive Loads Control and Alleviation concepts and technologies will be proposed, developed and evaluated. Aerodynamic design of an innovative spoiler will be undertaken, followed by a detailed aerodynamic characterisation of the spoiler and aileron...
Programme: H2020-EU.
Record Number: 200033
Last updated on: 2017-02-14
Periodic Reporting for period 1 - RELOAD (Regional turboprop loads control through active and passive technologies)
Loads Control and Alleviation (LCA), applying both active and passive concepts, has been identified as one of the key technologies for future regional turboprop aircraft. Adaptation of LCA in future aircraft designs will allow excessive gust and manoeuvre loads to be avoided...
Programme: H2020-EU.
Record Number: 205298
Last updated on: 2017-11-21
GREen Turboprop Experimental Laminar Flow Wind Tunnel Testing
ID: 737671
Data rozpoczęcia: 2017-02-01, Data zakończenia: 2019-07-31
The proposal addresses the themes outlined in Topic “JTI-CS2-2016-CFP03-REG-01-02 Green Turboprop configuration - Natural Laminar Flow adaptive wing concept aerodynamic experimental validation (WTT2)”. The objectives of the GRETEL project is the design, manufacturing...
Programme: H2020-EU.
Record Number: 211642
Last updated on: 2017-08-23
Large scale wind tunnel turboprop aircraft model integrating morphing devices for aerodynamic experimental assessment
ID: 755605
Data rozpoczęcia: 2017-09-01, Data zakończenia: 2019-02-28
WTM-RECYCLE addresses the call JTI-CS2-2016-CFP04-REG-01-05 and will in total re-design an existing WT-model (designed and manufacturing in the JTI-CS-project LOSITA), manufacture the new parts and implement them in into the model and finally perform a WT-tests focused on...
Programme: H2020-EU.
Record Number: 211376
Last updated on: 2017-07-12
Innovative Al alloy For aircraft structural parts using Additive MAnufacturing technology
ID: 755610
Data rozpoczęcia: 2017-07-01, Data zakończenia: 2020-06-30
The main goal of AlForAMA project is to develop an innovative High Strength Al alloy, feasible by powder metallurgy and suitable for Selective Laser Melting (SLM), with improved weldability and increased mechanical and corrosion resistance in comparison to cast grades Al...
Programme: H2020-EU.
Record Number: 211048
Last updated on: 2017-06-02
Fault Tolerant Aileron Actuation System for Regional Aircraft
ID: 738180
Data rozpoczęcia: 2017-04-01, Data zakończenia: 2021-03-31
The project TAIRA (Fault Tolerant Aileron Actuation System for Regional Aircraft) will deliver a highly innovative, cost-efficient, fault-tolerant, easy to maintain, safe and lightweight Electro-Mechanical Actuation system for the ailerons of regional aircraft, in full...
Programme: H2020-EU.
Record Number: 211354
Last updated on: 2017-07-24
Development of a hydraulic installation for electro-hydraulic integration of hybrid surface actuation systems in on-ground rigs
ID: 754815
Data rozpoczęcia: 2017-06-01, Data zakończenia: 2020-05-31
"Clean Sky 2 aims to deliver full-scale in-flight demonstration of novel architectures and configurations. This ambitious goal implies the development of a huge number of innovative technologies and systems which must be properly tested on ground and in flight.Indeed, in the...
Programme: H2020-EU.
Record Number: 211029
Last updated on: 2017-06-07
Advanced Energy STorage and Regeneration System for Enhanced Energy Management
ID: 755485
Data rozpoczęcia: 2017-07-01, Data zakończenia: 2020-06-30
ESTEEM Consortium will bring together their world-leading expertise in aircraft Electrical Power Systems (EPS), Power Electronics (PE), advanced control systems, modelling and simulation for aerospace applications, Energy Storage System (ESS) and smart and Enhanced Electrical...
Programme: H2020-EU.
Record Number: 210618
Last updated on: 2017-05-12
Detailed Model of a Morphing Wing
ID: 755621
Data rozpoczęcia: 2017-11-01, Data zakończenia: 2020-04-30
The general context is to use morphing wings with e.g. droop nose and morphing trailing edge instead of the classical high-lift systems like slats and flaps since these last ones are expensive, complex and heavy, and are therefore not acceptable solutions for the current...
Programme: H2020-EU.
Record Number: 210623
Last updated on: 2017-05-18
Variance Aware Determinate assembly Integrated System
ID: 738221
Data rozpoczęcia: 2017-04-01, Data zakończenia: 2020-03-31
The VADIS project aims to develop innovative and ground breaking assembly methods and solutions for cost effective wing manufacture for the future regional aircraft based on reverse engineering, intelligent process adaption, and variability aware processes and tooling. The...
Programme: H2020-EU.
Record Number: 209943
Last updated on: 2017-04-11
12 > 
List retrieved on: 2017-11-21
Śledź nas na: RSS Facebook Twitter YouTube Zarządzany przez Urząd Publikacji UE W górę