Community Research and Development Information Service - CORDIS

Abstract

The paper discusses the methodology followed in producing an optimised surface profile of belt limiter tiles. It is possible to construct an ideal surface for a belt limiter of fixed poloidal extent in a manner such that the peak heat flux to this limiter is very nearly constant for a broad range of scrape-off thicknesses. At the time of designing these surfaces a set of values had to be assumed for the radius of curvature of the plasma and for the range of scrape-off thickness. The ideal surfaces have been fabricated. Power deposition to these surfaces was computed to be within 5% of the ideal values.

Additional information

Authors: DEKSNIS E, JET Joint Undertaking, Abingdon, Oxon (GB)
Bibliographic Reference: Report: JET-R(88)19 EN (1988)
Availability: Available from the Publications Officer, JET Joint Undertaking, Abingdon, Oxon. OX14 3EA (GB)
Record Number: 198910709 / Last updated on: 1994-12-01
Category: PUBLICATION
Original language: en
Available languages: en