Community Research and Development Information Service - CORDIS

Abstract

Investigations of the plasma edge in TEXTOR are presented on the one hand by comparing results obtained with poloidal and toroidal limiters and on the other hand by discussing general problems of plasma edge physics which are independent of the limiter configuration. The characteristic properties of plasma flow to the different limiters are analysed and show e.g. that the fraction of total ion flow to the limiter is much larger in the case of a toroidal limiter (80%). Density and heat flux profiles are presented which demonstrate that for both types of limiters a significant steepening of the scrape-off layer (SOL) occurs close to the limiter, leading to a small heat load e-folding length of 5-8 mm. The velocity distribution of recycled neutral hydrogen at a main limiter has been determined from the Doppler broadening of the H(alpha) line. The data clearly show that a large fraction of particles (30-50%) is reflected at the limiter surface having energies of about the sheath potential. Significant isotopic effects (H/D) concerning the plasma edge properties and the plasma core are presented and their relation to enhanced particle and energy transport in hydrogen compared to deuterium is discussed. A decrease of the cross field diffusion coefficient with increasing density can be deduced from density profile measurements in the SOL and a comparison with density fluctuations is given. The role of oxygen for impurity release is demonstrated. A new type of wall conditioning - boronisation - is described, with two major improvements for quasi stationary conditions: reduction of oxygen and better density control. Best results with ICRH have been obtained under these conditions.

Additional information

Authors: SAMM U, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);BOGEN P, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);HARTWIG H, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);HINTZ E HÖTHKER K, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);LIE Y T, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);POSPIESZCZYK A, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);RUSBÜLDT D, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);SCHWEER B, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);YU Y J, Kernforschungsanlage Jülich GmbH, Postfach 1917, D-5170 Jülich (DE);HINTZ E HOTHKER K, Kernforschungsanlage Julich GmbH, Postfach 1917, D-5170 Julich (DE);RUSBULDT D, Kernforschungsanlage Julich GmbH, Postfach 1917, D-5170 Julich (DE)
Bibliographic Reference: Article: Journal of Nuclear Materials, Vol. 162-164 (1989), pp. 24-37
Record Number: 198911039 / Last updated on: 1994-12-01
Category: PUBLICATION
Original language: en
Available languages: en
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top