Community Research and Development Information Service - CORDIS

  • European Commission
  • CORDIS
  • Publications
  • SHARED COST ACTION - REACTOR SAFETY PROGRAMME RESEARCH AREA NO. 8 - LMFBR MATERIAL PROPERTIES AND STRUCTURAL BEHAVIOUR MANUFACTURE AND CHARACTERIZATION OF AUSTENITIC STEEL WELDED JOINTS

Abstract

This paper describes the results of the first phase of the project, i.e. manufacturing and characterisation of welded austenitic steel and the test matrix adopted to test the mechanical resistance of the weldings. Five different welding methods were produced and characterised in comparison to the parent material. The reference material was an AISI 316 L type steel close to the French Superphenix composition. The results of the mechanical testing and the relative comparison of the five welding methods are described in separate papers of the same session. The vacuum electron beam welding proves to have better properties than the other weld methods and to attain in most cases the properties of the parent material.

Additional information

Authors: SIMONI O, JRC ISPRA ESTAB. (IT);BOERMAN D J, JRC ISPRA ESTAB. (IT);KRISCHER W JRC ISPRA ESTAB. (IT), JRC ISPRA ESTAB. (IT)
Bibliographic Reference: PAPER PRESENTED: E.C. SEMINAR ON THE COMMISSION CONTRIBUTION TO REACTOR SAFETY RESEARCH, VARESE (IT), NOV. 20-24, 1989 SHARED CORS ACTION - REACTOR SAFETY PROGRAMME 1985-1987 AVAILABLE FROM COMMISSION OF THE EUROPEAN COMMUNITIES, DG XIII-C-3, L-2920 LUXEM
Availability: Can be ordered online
Record Number: 1989128058300 / Last updated on: 1990-10-01
Category: PUBLICATION
Available languages: en