Community Research and Development Information Service - CORDIS

Abstract

Deuterium recycling during and after ohmic limiter discharges in the Be-phase of JET are compared with that during the C-phase. For the Be-phase, effective transport parameters for diffusion and recombination of deuterium at surfaces of in-vessel components of JET are derived using plasma discharge data only. This and the analysis of the outgassing behaviour after the discharge, suggest that deuterium release is controlled by recombination with D/k (D is the diffusion, k the recombination coefficient) of about 1.0 to 10 x 1.0E21/m2, larger than expected from laboratory measurements.

Additional information

Authors: EHRENBERG J, JET Joint Undertaking, Abingdon, Oxon. (GB);DE KOCK L, JET Joint Undertaking, Abingdon, Oxon. (GB);PHILIPPS V, Institut für Plasmaphysik, Kernforschungsanlage Jülich GmbH, Jülich (DE);CAUSEY R A, Sandia National Laboratories, Livermore (US);HSU W L, Sandia National Laboratories, Livermore (US)
Bibliographic Reference: Article: Journal of Nuclear Materials, Vol. 176 & 177 (1990) pp. 226-230
Record Number: 199110643 / Last updated on: 1994-12-02
Category: PUBLICATION
Original language: en
Available languages: en