Community Research and Development Information Service - CORDIS


The six 250 mm thin orifice plates were tested in the EEC meter run, using the cold-water test facilities at Delft Hydraulic Laboratory, using all three sets of pressure tapping. The 0.75 plate was tested with and without a Zanker flow straightener 42D upstream of the plate with negligible differences.

Additional information

Authors: DE JONG J, Delft Hydraulics Laboratory, Delft (NL)
Bibliographic Reference: EUR 13706 EN (1991) 56 pp., MF, ECU 4
Availability: (2)
Record Number: 199110736 / Last updated on: 1994-12-02
Original language: en
Available languages: en