Community Research and Development Information Service - CORDIS


The six EEC thick 250 mm orifice plates were dimensionally checked before and after flow calibration tests were carried out in the NEL cold-water test facility. No measurable changes were found in the flatness, downstream level, surface texture and concentricity of the plates. A slight increase in the edge radii was detected, with the 0.375 plate being outside the allowable tolerances.

Additional information

Authors: NATIONAL ENGINEERING LABORATORY, National Engineering Laboratory, Engineering Metrology Business Centre, Glasgow (GB)
Bibliographic Reference: EUR 13729 EN (1991) 25 pp., MF, ECU 4
Availability: (2)
Record Number: 199110956 / Last updated on: 1994-12-02
Original language: en
Available languages: en