Community Research and Development Information Service - CORDIS


The six EEC thin orifice plates were dimensionally checked before and after flow calibration tests were carried out in the NEL cold-water test facility. No measurable changes were found in the flatness, surface texture and concentricity of the plates, but the edge radii had increased slightly.

Additional information

Authors: NATIONAL ENGINEERING LABORATORY, National Engineering Laboratory, Engineering Metrology Business Centre, Glasgow (GB)
Bibliographic Reference: EUR 13731 EN (1991) 16 pp., MF, ECU 4
Availability: (2)
Record Number: 199110958 / Last updated on: 1994-12-02
Original language: en
Available languages: en