Community Research and Development Information Service - CORDIS

Abstract

The six EEC thick 100 mm orifice plates were dimensionally checked before and after flow calibration tests were carried out in the NEL cold-water test facility. No measurable changes were found in the flatness, downstream bevel, surface texture and concentricity of the plates, and the edge radii remained within tolerances.

Additional information

Authors: NATIONAL ENGINEERING LABORATORY, National Engineering Laboratory, Engineering Metrology Section, Glasgow (GB)
Bibliographic Reference: EUR 13739 EN (1991) 12 pp., MF, ECU 4
Availability: (2)
Record Number: 199110972 / Last updated on: 1994-12-02
Category: PUBLICATION
Original language: en
Available languages: en