Community Research and Development Information Service - CORDIS

Abstract

The research project has developed checking and servicing devices for analog and digital interfaces. The interface data are in accordance with the international standard IEC 381 (Part 1 and Part 2) and with the German operational standard BB 22 444 (Part 3). A specific requirement has been the widest possible use for all types of intrinsically safe electrical equipment. Five checking and servicing devices were developed for analog interfaces (including frequency interfaces). The devices serve for checking current interfaces (0 - 20 mA; 4 - 20 mA), voltage interfaces (0 - 5 V) and frequency interfaces (5 - 15 Hz; 0.5 - 1.5 kHz; 5 - 15 kHz). They check both the transducers (for example, by separating and including them in the conductor loop) and the entire transmission line, the data logging and the data transmission installation. In the latter case the checking device is used instead of the transducer. One checking and servicing device was developed for checking serial interfaces. The device has been designed to check, amongst others, the serial signals of a TTY interface with its transmission procedure (DUST 3964 R) pursuant to Bergbau-Bietriebsblatt (operational standard for the mining industry) 22 444, Part 4. Appropriate couplers and modules were devised for physical connection of the checking device to selected serial interfaces; a charging unit was also devised.

Additional information

Authors: KOCH R, DMT-Gesellschaft für Forschung und Prüfung mbH, Bochum (DE);RÖDER U, DMT-Gesellschaft für Forschung und Prüfung mbH, Bochum (DE);RODER U, DMT-Gesellschaft fur Forschung und Prufung mbH, Bochum (DE)
Bibliographic Reference: EUR 14611 DE (1993) 56 pp., MF, ECU 4
Availability: (2)
Record Number: 199310944 / Last updated on: 1994-11-29
Category: PUBLICATION
Original language: de
Available languages: de
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top