Preparation of the ITER Poloidal Field Conductor Insert (PFCI) test
The Poloidal Field Conductor Insert (PFCI) of the International Thermonuclear Experimental Reactor (ITER) has been designed in the EU and is being manufactured at Tesla Engineering, UK, in the frame of a Task Agreement with the ITER International Team. Completion of the PFCI is expected at the beginning of 2005. Then, the coil shall be shipped to JAERI Naka, Japan, and inserted into the bore of the ITER Central Solenoid Model Coil, where it should be tested in 2005 to 2006. The PFCI consists of a NbTi dual-channel conductor, almost identical to the ITER PF1 and PF6 design, ~ 45m long, with a 50mm thick square stainless steel jacket, wound in a single-layer solenoid. It should carry up to 50 kA in a field of ~ 6T, and it will be cooled by supercritical He at ~ 4.5K and ~ 0.6MPa. An intermediate joint, representative of the ITER PF joints and located at relatively high field, will be an important new item in the test configuration with respect to the previous ITER Insert Coils. The PFCI will be fully instrumented with inductive and resistive heaters, as well as with voltage taps, Hall probes, pick-up coils, temperature sensors, pressure taps, strain and displacement sensors. The test program shall be aimed at DC and pulsed performance assessment of conductor and intermediate joint, AC loss measurement, stability and quench propagation, thermalhydraulic characterization. Here we give an overview of the preparatory work towards the test, including a review of the coil manufacturing and of the available instrumentation, a discussion of the most likely test program items, and a presentation of the supporting modelling and characterization work performed so far.
Bibliographic Reference: An oral paper given at: 2004 Applied Superconductivity Conference Organised by: 2004 Applied Superconductivity Conference Held at: Adam's Mark Hotel, Jacksonville (US)
Availability: Available from Association EURATOM-CEA, Departement de Recherches sur la Fusion Controlee, CEA Cadarache, F-13108 St Paul-Lez-Durance, France Tel: (+33) 4 42 25 70 01; Fax: (+33) 4 42 25 64 21 E-mail: email@example.com
Record Number: 200417725 / Last updated on: 2004-11-02
Original language: en
Available languages: en