Community Research and Development Information Service - CORDIS


After an extensive R%D development program, a Full-Scale Divertor Target prototype, manufactured with all the main features of the corresponding ITER divertor, was intensively tested in the high heat flux FE200 facility. The prototype consists of four units having full monoblock geometry. The lower part (CFC armour) and the upper part (W armour) of each monoblock were joined to the solution annealed, quenched and cold worked CuCrZr tube by HIP technique. This paper summarises and analyses the main test results obtained on this prototype

Additional information

Authors: MISSIRLIAN M, Association Euratom-CEA sur la Fusion, CEA Cadarache, Saint-Paul-lez-Durance (FR)
Bibliographic Reference: An oral paper given at: 23rd Symposium on Fusion Technology Organised by: Consorzio RFX Held at: Fondazione Cini, Venice, Italy
Availability: Available from Association EURATOM-CEA, Département de Recherches sur la Fusion Contrôlée, CEA Cadarache, F-13108 St Paul-Lez-Durance, France Tel: (+33) 4 42 25 70 01; Fax: (+33) 4 42 25 64 21 E-mail:
Record Number: 200517965 / Last updated on: 2005-03-08
Original language: en
Available languages: en