Results and analysis of high heat flux tests on a full-scale vertical target prototype of ITER divertor
After an extensive R&D development program, a full-scale divertor target prototype, manufactured with all the main features of the corresponding ITER divertor, was intensively tested in the high heat flux FE200 facility. The prototype consists of four units having a full monoblock geometry. The lower part (CFC armour) and the upper part (W armour) of each monoblock were joined to the solution annealed, quenched and cold worked CuCrZr tube by HIP technique. This paper summarises and analyses the main test results obtained on this prototype.
Bibliographic Reference: An article published in: Fusion Engineering and Design (2006); Volumes 75-79, Pages 435-440
Availability: This article can be accessed online by subscribers, and can be ordered online by non-subscribers, at: http://www.sciencedirect.com/science/journal/09203796
Record Number: 200719037 / Last updated on: 2007-04-02
Original language: en
Available languages: en