Community Research and Development Information Service - CORDIS

  • European Commission
  • CORDIS
  • Publications
  • Certification Report, Certification of Charpy V-notch reference test pieces of 150 J nominal absorbed energy, Certified Reference Materials ERM-FA415k, ERM-FA415l, ERM-FA415m, ERM-FA415n, ERM-FA415o

Abstract

This certification report describes the processing and characterisation of ERM-FA415k, ERM-FA415l, ERM-FA415m, ERM-FA415n, and ERM-FA415o, five batches of Charpy V-notch certified reference test pieces. Sets of five of these test pieces are used for the verification of pendulum impact test machines according to EN 10045-2 (Charpy impact test on metallic materials, Part 2. Method for the verification of impact testing machines [1]) or according to ISO 148-2 (Metallic materials - Charpy pendulum impact test - Part 2: Verification of test machines [2]).
The certified values are traceable to the Charpy impact test method as described in EN 10045-1 [3] and ISO 148 [4], via the corresponding Master Batch ERM-FA415b of the same nominal absorbed energy (150 J).
ERM-FA415k, ERM-FA415l, ERM-FA415m, ERM-FA415n, and ERM-FA415o have been accepted as European Reference Material (ERM) after successful peer evaluation by the partners of the European Reference Materials consortium.

Additional information

Authors: ROEBBEN G, European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Geel (BE);LAMBERTY A, European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Geel (BE)
Bibliographic Reference: EUR 22699 EN (2006), 33 pp. Free of charge
Availability: Available from European Commission, JRC Knowledge Management Unit, Ispra (IT) Tel: +39 033278 9893 Fax: +39 033278 5409 E-mail: jrc-info@ec.europa.eu or Bruxelles (BE) Tel: +32 2 295 76 24 Fax: +32 2 299 63 22
ISBN: ISBN: 978-92-79-05220-0
Record Number: 200719184 / Last updated on: 2007-05-21
Category: PUBLICATION
Original language: en
Available languages: en