Community Research and Development Information Service - CORDIS

FP7

Processing of tungsten/copper materials from W-CuO powder mixtures

Funded under: FP7-EURATOM

Abstract

In this study, processing of W�Cu materials from attritor-milled W-CuO mixtures is described. Reduction steps of powder compacts are investigated by TGA, dilatometry and XRD analyses. Morphological characteristics are observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Sintering of reduced powder with different compositions is analyzed by dilatometry and assembly of graded materials is briefly discussed.

Additional information

Authors: LAY S, Laboratoire de Science et Ingénierie des Matériaux et Procédés, SIMAP, INPGrenoble-CNRS-UJF, Domaine Universitaire, Saint-Martin d�Hères (FR);MITTEAU R., Département de Recherches sur la Fusion Contrôlée, Association Euratom-CEA sur la Fusion, CEA Cadarache, Saint-Paul-lez-Durance (FR);OZER O, Laboratoire de Science et Ingénierie des Matériaux et Procédés, SIMAP, INPGrenoble-CNRS-UJF, Domaine Universitaire, Saint-Martin d�Hères (FR);MISSIAEN J-M, Laboratoire de Science et Ingénierie des Matériaux et Procédés, SIMAP, INPGrenoble-CNRS-UJF, Domaine Universitaire, Saint-Martin d�Hères (FR)
Bibliographic Reference: An article published in: Materials Science and Engineering: A, Volumes 460-461 (2007), pp. 525-531
Availability: This article can be accessed online by subscribers, and can be ordered online by non-subscribers, at: http://dx.doi.org/doi:10.1016/j.msea.2007.01.089
Record Number: 200719370 / Last updated on: 2007-09-06
Category: PUBLICATION
Original language: en
Available languages: en