Community Research and Development Information Service - CORDIS

Abstract

This certification report describes the processing and characterisation of ERM-FA016at, a batch of Charpy V-notch certified reference test pieces.
Sets of five of these test pieces are used for the verification of pendulum impact test machines according to EN 10045-2 (Charpy impact test on metallic materials, Part 2. Method for the verification of impact testing machines [1]) or according to ISO 148-2 (Metallic materials - Charpy pendulum impact test � Part 2: Verification of test machines [2]). The certified value for KV (absorbed energy = energy required to break a V-notched test piece using a pendulum impact test machine) is 126.3 J. The associated expanded uncertainty (3.6 J, k = 2 corresponding to a confidence level of 95 %) is calculated for the mean of a set of five test pieces. The certified value is traceable to the Charpy impact test method as described in EN 10045-1 [3] and ISO 148 [4], via the corresponding master batch ERM-FA016c of the same nominal absorbed energy (120 J).

Additional information

Authors: ROEBBEN G, European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Geel (BE);LAMBERTY A, European Commission, Joint Research Centre, Institute for Reference Materials and Measurements, Geel (BE)
Bibliographic Reference: EUR 22771 EN (2007), 22 pp. Free of charge
Availability: Available from European Commission, JRC Knowledge Management Unit, Ispra (IT) Tel: +39 033278 9893 Fax: +39 033278 5409 E-mail: jrc-info@ec.europa.eu or Bruxelles (BE) Tel: +32 2 295 76 24 Fax: +32 2 299 63 22
ISBN: ISBN: 978-92-79-05721-2
Record Number: 200719520 / Last updated on: 2007-10-29
Category: PUBLICATION
Original language: en
Available languages: en