Forschungs- & Entwicklungsinformationsdienst der Gemeinschaft - CORDIS

Optimization of the grinding and conditioning process

The accuracy, stiffness and other relevant parameters of an existing grinding machine for conventional grinding wheels were adapted to cubic boron nitride (CBN) grinding requirements, greatly improving the machine. In addition, a modular system for process monitoring, diameter measurement, concentricity measurement and roughness measurement was developed and was integrated successfully in the above mentioned machine; the development work was accompanied by an extensive series of measuring and experimental tests.

Analysis of the process by the measuring and monitoring modules is based on sensor information acquired by each module. An extensive sensor system was therefore installed in the machine, in order to establish the type of sensor which provides the most informative data on the relevant process states. This includes the derivation of informative parameters from the sensor signals. Sensor types installed on the machine included piezoelectric force sensors in the form of single force cells, force measuring plates and force measuring rings, together with inductive displacement sensors for distance and force measurement and with acoustic emission (AE) sensors, optical sensors and effective power sensors.

As a result of the project, the functions of the various sensor types were improved, yielding positive benefits for other applications of this sensor technology outside the grinding machine sector, for example on lathes, milling machines or drilling machines.

An ultrahigh precision contactless diameter and concentricity measuring module and a contactless roughness measuring module were developed. Following implementation of test results in a monitoring module, it is now possible to monitor the grinding, dressing and sharpening processes for unacceptable errors; the measuring and monitoring modules are interlinked with the machine control so that the grinding machine can respond automatically to alarms.

Kontakt

Dietmar GROH, (Head of Electronnic Development)
Tel.: +49-241-166090
Fax: +49-241-1660950
Folgen Sie uns auf: RSS Facebook Twitter YouTube Verwaltet vom Amt für Veröffentlichungen der EU Nach oben