Servicio de Información Comunitario sobre Investigación y Desarrollo - CORDIS


SARISTU Informe resumido

Project ID: 284562
Financiado con arreglo a: FP7-TRANSPORT
País: Germany

Periodic Report Summary 4 - SARISTU (Smart Intelligent Aircraft Structures)

Project Context and Objectives:
SARISTU – SmARt Intelligent Aircraft STrUctures (, is a level 2 project conducted within the European Union’s 7th Framework programme addressing the air travel cost reduction aspect of the 4th call.
As such, SARISTU’s principal aims target a reduction of the manufacturing and in particular the operational cost of civil airliners. For this purpose, it matures and integrates different concepts which enable further fuel burn reductions through aircraft drag and weight reductions, reduce aircraft downtime in case of unscheduled inspections and improve the manufacturing times and subsequent performance of advanced fuselage structures.
Organized along the major principal components of an aircraft, development and integration activities centre on wing specific applications on one hand and fuselage applications on the other.
With respect to the wing specific applications, the further maturation and development of conformal morphing technologies, which enable a smooth shape change of aerodynamic surfaces, as well as the integration of structural health monitoring are at the focus of activities. To date, conformal morphing surfaces could not be implemented in practice due to the conflicting requirements of a high required stiffness and the ability to be actively deformed. Furthermore, additional functionalities have to address specific aircraft requirements such as lightning strike protection, bird strike protection, erosion protection and a reliable integration of different sensor systems into the control architecture. By enabling the consideration of conformal moving surfaces at the aircraft design stage, SARISTU has shown these technologies capabilities to reduce the fuel consumption of future airliners by 6,5% while at the same time offering improvements in flight path noise of up to 8dB.
Fuselage specific applications centre on the integration of structural health monitoring technologies in the aircraft architecture as well as the further maturation of multifunctional structures and the improvement of a typical fuselage’s robustness. By enabling a significantly more rapid damage assessment and categorization than is currently possible, aircraft structural inspections due to accidental damages are expected to be performed with a significantly reduced delay. This in turn was shown to result in a cost reduction of such in-service inspection activities of more than 1,33% for carbon fibre based fuselage structures. Furthermore, improvements are investigated and developed within SARISTU’s multifunctional structures approach which, among other solutions, arise from integrating carbon nanotubes into the basic skin-stringer-frame system. The resulting gains can be exploited either directly for an improved structural robustness or translated into corresponding structural weight savings of 2,2%. Although short of the 3% objective, additional benefits coming from the possible exploitation of the increased electrical conductivity boost achievable weight savings to 5% versus the reference structure.
Multifunctional structures also utilise the conductivity of carbon nanotubes in order to enable a carbon fibre based structure to perform low level electrical functionalities. Together with further technological integration targeting the higher electrical functions such as electrical grounding and bonding, it was expected that the currently heavy and costly electrical structure network required for a black fuselage can be designed significantly lighter and installed approximately 15% more cheaply. Due to the difficult establishment of complex benchmarks, SARISTU could only determine a 4% cost improvement but, as it was unable to factor in the exact installation cost savings and had to rely exclusively on weight saving benefits, this is a highly conservative estimate.
Culminating in wing and fuselage specific demonstration and performance verification activities in its fourth and final year, SARISTU has shown benefits beyond its current scope of more affordable air travel. While conformal morphing can in principle be applied to further aerodynamic surfaces, it could also bring benefits to other industries where active aerodynamic or fluidic control is beneficial. Similarly, structural health monitoring can be expected to bring operational benefits wherever light weight construction is of primary importance. Last but not least, overcoming the technical obstacles of composite structures related to their electrical properties as well as the integration of data generation and transmission will be applicable well beyond the aircraft industry.

Project Results:
At present, SARISTU has successfully completed it active project phase, delivering 271 dissemination actions to the scientific community and well beyond through dissertations, published papers, conference presentations, press releases and attendance to trade fairs. The successful test completion of its three dozen significant structural demonstrators in the fourth year allowed the completion of 186 deliverables and milestones totalling over 10,000 pages. An early summary of the most significant results has been made available to the public in the form of the 1039 page Proceedings of the Final Project Conference.
Due to the focus on structural testing, the majority of the demonstration exercises resulted in the destruction of these test articles. However, the SARISTU Wind Tunnel Model used to verify morphing and load monitoring capabilities, the SARISTU Door Surround Structure used to verify damage detection, location and sizing capabilities, one smaller demonstrator for each of the morphing leading-, trailing- and winglet trailing edges as well as the demonstration panel for co-bonded metal remain with the respective project partners.

Potential Impact:
Comparison of original objectives to final results:

Wing Integration
• Morphing technology integration on a typical outboard wing is expected to achieve a total additional fuel consumption reduction of 6%
o At 6,5%, this objective was exceeded as reported in the final wing wrap-up meeting and derived from deliverables D125.1 Low Velocity Wind Tunnel Test and D125.3 Wing Demonstrator Summary Evaluation.
• and reduce the impact of air traffic noise by 6 dB(A)
o This objective was achieved although the tightly formulated project plan could not be stretched sufficiently to enable experimental verification. The objective should however be considered achieved due to the fundamental similarity to the Leading Edge Device from the investigation performed by M Pott-Pollenske, J Wild and L Bertsch and reported in “Aerodynamic and Acoustic Design of Silent Leading Edge Devices”, American Institute of Aeronautics and Astronautics Conference, 2014 to yield up to 8dB in air traffic noise reduction.

Fuselage Integration
• Damage detection capabilities for operational cost reductions regarding structure inspection by 1%,
o The Door Surround Structure monitoring on its own already exceeds this objective with 1.33% calculated as shown in deliverable “D132.1 Technology benefit assessment (cost, weight, operations)”.
• The feasibility of combining Structural Health Monitoring (SHM) with nanoreinforced resins for Damage Tolerance improvement for weight savings exceeding 3%,
o A combination with SHM for weight saving was unfortunately not possible during the project due to the more significant than anticipated repercussions of operational reliability if an aircraft designed for SHM is subject to robustness considerations of large sensor networks.
o Nanoreinforced resins on their own are predicted to result in 2.2% structure weight reductions through improved damage tolerance, partially meeting this objective. It should be noted that this weight saving estimation is based on implementation on the fuselage alone, and does not account for potential changes to associated design requirements that could yield further savings.
o However, Nanocomposites allow additional weight savings by the possible removal of electrical protection measures. In a first iteration, this was shown to result in a further 2.8% weight saving with further potential evident. As this mode of generating weight savings can indeed be stacked, the total demonstrated weight saving from Nanocomposites reaches 5%, clearly exceeding this objective.
• And an Electrical Structure Network installation cost reduced by 15%
o This objective was only partially met as the team composition eliminated a key capability from the project during the active phase. As such, it was not possible to establish a comprehensive benchmark. Highly conservative assumptions put fuselage cost reduction opportunities at more than 4% as shown in deliverable “D132.1 Technology benefit assessment (cost, weight, operations)”, but this only includes elimination of current protective measures rather than factoring in the eliminated installation cost adequately.

List of Websites:

Información relacionada


Katrin GENZEL, (EU Project Manager)
Tel.: +49 40 743 74005
Fax: +49 40 743 74615
Correo electrónico


Número de registro: 184158 / Última actualización el: 2016-06-08
Fuente de información: SESAM