Service Communautaire d'Information sur la Recherche et le Développement - CORDIS

FP5

CREVCORR Résumé de rapport

Project ID: G5RD-CT-2000-00139
Financé au titre de: FP5-GROWTH
Pays: Denmark

Crevice formation technique

When testing resistance to crevice corrosion it is necessary to create a crevice between the steel surface and a crevice forming material, usually a polymer. The geometry of the crevice formed has to be accurate and reproducible if reproducible results shall be obtained.

The severity of the crevice and deeper crevices are the most severe for initiating crevice corrosion in an environment containing chloride. This result describes a technique to form a defined crevice on a stainless steel test specimen. It is recommended to use a spring loaded crevice assembly and use PVDF as the crevice forming material.

Contact

Ebbe RISLUND, (Head of Section)
Tél.: +45-43-267268
Fax: +45-43-267011
E-mail