Servicio de Información Comunitario sobre Investigación y Desarrollo - CORDIS

FP5

DENTICAST Informe resumido

Project ID: G1ST-CT-2002-50223
Financiado con arreglo a: FP5-GROWTH
País: France

Denticast prototype

The Denticast prototype is in function at the co-ordinator site (Lemouel S.A.). This prototype is able to cast all the current dental alloys, including titanium. In order to avoid sensitive alloys metallurgical problems (mainly titanium) the casting process is performed under secondary argon vacuum (meaning several cycles vacuum - argon). In order to keep the metal as clean as possible, the induction melting was adopted, either in the ceramic crucible or from segmented metallic bars.

Centrifugal casting process assures the evacuation of gases and segregation of eventual impurities and segregations. The process is completely automated, once established an optimal casting regime, the automation system permit the reproduction of the same technological conditions from the machine memory.

Contacto

Nicolas QUINO, (Manager)
Tel.: +33-2-41437031
Fax: +33-2-41436092
Correo electrónico
Síganos en: RSS Facebook Twitter YouTube Gestionado por la Oficina de Publicaciones de la UE Arriba