Wspólnotowy Serwis Informacyjny Badan i Rozwoju - CORDIS

FP5

DENTICAST Streszczenie raportu

Project ID: G1ST-CT-2002-50223
Źródło dofinansowania: FP5-GROWTH
Kraj: France

Denticast prototype

The Denticast prototype is in function at the co-ordinator site (Lemouel S.A.). This prototype is able to cast all the current dental alloys, including titanium. In order to avoid sensitive alloys metallurgical problems (mainly titanium) the casting process is performed under secondary argon vacuum (meaning several cycles vacuum - argon). In order to keep the metal as clean as possible, the induction melting was adopted, either in the ceramic crucible or from segmented metallic bars.

Centrifugal casting process assures the evacuation of gases and segregation of eventual impurities and segregations. The process is completely automated, once established an optimal casting regime, the automation system permit the reproduction of the same technological conditions from the machine memory.

Reported by

LEMOUEL S.A.
22, Boulevard de l’Industrie
49017 Angers Cedex 1
France
See on map
Śledź nas na: RSS Facebook Twitter YouTube Zarządzany przez Urząd Publikacji UE W górę