Servicio de Información Comunitario sobre Investigación y Desarrollo - CORDIS


TURNHONE Informe resumido

Project ID: G1ST-CT-2002-50248
Financiado con arreglo a: FP5-GROWTH
País: Germany

Knowledge about turning of small bores

In this project the manufacturing of small bores with a diameter of 4-5 mm and a L/D (length-to-diameter) ratio of 5 by means of hard turning was enabled.
This is a step way beyond the state of the art because up to now the maximum L/D ratio with which hard turning of bores could be realised was 3. In close co-operation of Hamoedia with the Fraunhofer IPT a solution was found to develop rigid tools, which enabled reliable machining of the small, bores in question within tolerances of 2-3 micons.


Jens HELBIG, (Abteilung Prozesstechnologie)
Tel.: +49-24-18904136
Fax: +49-24-189046136
Correo electrónico
Síganos en: RSS Facebook Twitter YouTube Gestionado por la Oficina de Publicaciones de la UE Arriba