Community Research and Development Information Service - CORDIS

FP7

TESTPEP — Result In Brief

Project ID: 243791
Funded under: FP7-SME
Country: United Kingdom

Non-destructively testing plastic pipe welds

Polyethylene (PE) has better resistance to chemicals and corrosion than metals. New ultrasonic non-destructive testing technology will enable easy and cost-effective pipe weld testing during manufacture, installation and beyond.
Non-destructively testing plastic pipe welds
PE is lightweight, has long predicted service life and leakage-resistant — all of which decrease installation and maintenance costs of piping, while reducing environmental hazards. Until now, testing the joints in PE pipes required weld removal for mechanical testing or visual inspection.

The EU-funded project TESTPEP developed an automated phased-array ultrasonic non-destructive evaluation (NDE) system. This enables the volumetric analysis of welds in PE pipes, either during production or retrospectively. The team successfully optimised all the main system components and characterised ultrasound propagation for both medium density and high density PE pipe materials.

Procedures were then developed to insert planar flaws and particulate contamination into both butt fusion and electrofusion welds. Following this, numerous welds with variable flaws were manufactured to develop inspection procedures and flaw acceptance criteria, based on both short-term and long-term mechanical performance.

Researchers designed and manufactured novel phased-array probes and different probe holders and attachment mechanisms for the modular scanning system. These are capable of inspecting welds in PE pipes of diameters ranging from 180 to 710 millimetres.

Automated software analyses the inspection data, generating a map of the weld and comparing results with acceptance criteria. The complete prototype phased array ultrasonic inspection system has been assessed in the laboratory, during manufacturing and in the field. In the assessment trials, the system successfully detected all major flaw types of interest to the European plastics pipes industry.

TESTPEPs ultrasound-based NDE technology for welds in plastic piping fills a critical industry need for standardised flaw detection and acceptance criteria. Information about the project including brochures, magazine articles, conference papers and videos can be found in over 25 publications on the project’s website. Commercialisation will reduce leaks, disruptions due to repairs and the environmental risks of catastrophic failures. Increasing confidence in the use of plastic piping will also enhance the competitive position of plastics’ manufacturers.

Related information

Keywords

Polyethylene, non-destructive testing, pipe, weld, phased-array, ultrasonic, volumetric analysis, flaw acceptance criteria, probe, prototype
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top