Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Results 61 - 70 of 4097
Results/page:
|< < 2 3 4 5 6 78 9 10 11 > >| 
The infrared sensor is currently used in the ceramic factory, but some limits have been found about its use, especially for on-line applications. For example, in the case of the porcelain stoneware production, some problems arise from the influence of the powder colour. In thi...
Programme: FP4-BRITE/EURAM 3
Record Number: 32757
Last updated on: 2004-08-05
Advanced high power negative electrode in high power cells LIR6. Negative electrode optimised for high power application with advanced graphite powders prepared from low cost precursors. LIR6 round cells (6Ah) will be introduced into high power batteries for hybrid electric ve...
Programme: FP4-BRITE/EURAM 3
Record Number: 28401
Last updated on: 2002-09-12
The electrical modelling of magnetic components was intended for use during topology pre-selection performed by the knowledge-base (KB) and at simulation during the pre-design of the finally selected and parameterised topology. It should yield accurate power losses, size and s...
Programme: FP4-BRITE/EURAM 3
Record Number: 27933
Last updated on: 2002-05-23
Oxide based CMCs were developed by novel manufacture routes with main works on matrix development and fibre coatings. As ceramic fibre a commercial NextelTM 720 fibre was used. Different batches of materials were developed and characterised in terms of mechanical strength, den...
Programme: FP4-BRITE/EURAM 3
Record Number: 44840
Last updated on: 2008-11-25
The targets of this activity was extension of the processing capabilities of a laboratory scale fibre coating reactor to produce in continuous mode reproducible coatings on each of the individual filaments of Nextel 720 multifilament fibre tows over lengths of the order of tho...
Programme: FP4-BRITE/EURAM 3
Record Number: 44841
Last updated on: 2008-12-02
A complete set of NDE methodologies (consisting of Ultrasonic and Acoustic Emission) applied for the non-destructive characterization of all the Oxide/Oxide Ceramic Composites and Components which developed within the frame of the CERCO project. Classical ultrasonic inspection...
Programme: FP4-BRITE/EURAM 3
Record Number: 44842
Last updated on: 2009-01-20
A fully three dimensional, unsteady CFD method for modeling the complete pre-swirl system has been developed. This has been applied to the Karlsruhe University test rig geometry and found to give very good agreement in terms of pressure change through the complete system, and ...
Programme: FP4-BRITE/EURAM 3
Record Number: 28239
Last updated on: 2002-08-06
[REPORT SUMMARY] Liquid phase etching cell
A liquid phase etching cell has been developed for laser thermochemical surface processing. The cell consists of two parts, a co-axial nozzle assembly and a basin, which are connected to each other by means of elastomer bellows. The nozzle can be adjusted laterally and in h...
Programme: FP4-BRITE/EURAM 3
Record Number: 28355
Last updated on: 2002-09-09
A halftone mask has been manufactured for the ablation and etching of diffractive optical elements. Half-tone mask technology makes use of sub-diffraction limit features in the mask in order to produce genuine grey-scale levels in the exposure intensity, resulting in a varying...
Programme: FP4-BRITE/EURAM 3
Record Number: 28351
Last updated on: 2003-10-09
Around 60Mt of coal fly ash is produced annually within the EU by coal combustion. This fly ash is utilised for about 50% in the cement and concrete industry and in civil construction works. Both applications are of low or even negative economic value. The other 50% of fly ash...
Programme: FP4-BRITE/EURAM 3
Record Number: 32668
Last updated on: 2004-07-20
|< < 2 3 4 5 6 78 9 10 11 > >| 
List retrieved on: 2017-06-23