Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements


Download results of this page


Refine by:

Advanced search

Results 21 - 30 of 800
Order by: Results/page:
< 1 2 34 5 6 7 8 9 10 > >| 
Radial basis functions at fluid Interface Boundaries to Envelope flow results for advanced Structural analysis
ID: 632556
Start date: 2014-12-01, End date: 2016-11-30
In the framework of Clean Sky2, Green Regional Aircraft - GRA - will deliver low-weight aircraft using smart structures. With the aim of mitigating environmental impact through a substantial reduction of pollutant emissions and fuel consumption, a reliable numerical methodolo...
Programme: FP7-JTI
Record Number: 192637
Last updated on: 2016-08-29
technology development and fabrication of HIgh TEmperature high frequency CApacitors for power switch integration
ID: 641553
Start date: 2014-12-01, End date: 2016-11-30
Automotive, aerospace, and energy production industries can greatly benefit from the development of semiconductor based electronics operating at temperature higher than 150 °C. Wide bandgap semiconductors like SiC and GaN are key enablers as these allow electronics to functio...
Programme: FP7-JTI
Record Number: 193065
Last updated on: 2017-03-27
Developing a European Framework for the generation of guarantees of origin for green hydrogen
ID: 633107
Start date: 2014-11-01, End date: 2016-10-31
The development of hydrogen as an energy carrier will be dependent upon the capacity of the market to offer low-carbon or carbon-free hydrogen to end-users and consumers. However, the production of green hydrogen and its consumption will most likely be unbundled in order to o...
Programme: FP7-JTI
Record Number: 197066
Last updated on: 2016-03-31
FAST impact cross-analysis methodology for Composite leading edge Structures
ID: 632420
Start date: 2014-11-01, End date: 2016-10-31
"ACS will develop an integrated numerical and test approach for composite wing leading edge hailstone impact application with electrical ice protection system. We propose finite element free fast impact models satisfying the governing equations of impact mechanics coupled wit...
Programme: FP7-JTI
Record Number: 192458
Last updated on: 2015-03-12
In-situ Diagnostics in Water Electrolyzers
ID: 621237
Start date: 2014-11-01, End date: 2018-10-31
In this project an electrochemical in-situ diagnostic tools for locally resolved measurements of current densities, which has been originally developed for application in polymer electrolyte membrane based fuel cells, will be adapted and integrated into water electrolysers. T...
Programme: FP7-JTI
Record Number: 192608
Last updated on: 2016-12-26
Adaptable power density coating for energy efficient heating of cockpit and cabin
ID: 641592
Start date: 2014-11-01, End date: 2016-04-30
The objective of HELI-COMFORT is to advance the technology readiness level of an innovative, purpose made, prototypic electrical heating system to a TRL 4 or higher level. After laboratory scale tests on smaller samples and an CFD based numerical simulation of such heating el...
Programme: FP7-JTI
Record Number: 198031
Last updated on: 2016-05-09
Development of a composite sleeve for spatial separation of rotor and stator in an electric motor
ID: 641559
Start date: 2014-10-01, End date: 2016-05-31
The Project COMPOSLEEVE is aimed to find out a way to produce a stator sleeve for stator/rotor separation in electrical motor, which need to be cooled with aggressive fluids such as Skydrol, with high internal pressure and a temperature range that goes above 200ºC. For this a...
Programme: FP7-JTI
Record Number: 197822
Last updated on: 2016-04-12
Design of Experiments to OPTIMIZE design solutions for a Power reduction Gearbox
ID: 641542
Start date: 2014-10-01, End date: 2016-06-30
The project's goal is the realisation of a dedicated experimental DOE, to evaluate the effect of tolerance variation in the gear efficiency. Users of cylindrical gears in aeronautics demand continuous improvement such as increased power density, lightweight, compact size, red...
Programme: FP7-JTI
Record Number: 192607
Last updated on: 2017-04-10
European 450mm Lithography and Metrology Development for Advanced Patterning
ID: 621280
Start date: 2014-10-01, End date: 2017-10-01
The overall goal of the E450LMDAP project is to develop 450 mm lithography and metrology modules and tools and to initiate distributed pilot line activities over the 450 mm lithography and metrology tool platform eco system. These pilot line activities will go down to the pil...
Programme: FP7-JTI
Record Number: 210444
Last updated on: 2017-05-30
DRIVING RE-INVESTMENT IN R&D AND RESPONSIBLE ANTIBIOTIC USE
ID: 115618
Start date: 2014-10-01, End date: 2017-09-30
Antimicrobial resistance (AMR) is widespread. Its global human and economic burden is tremendous and increasing annually. Yet today only a few pharmaceutical companies retain active antibacterial drug discovery programmes. While the elaboration of antibiotics with novel mecha...
Programme: FP7-JTI
Record Number: 203717
Last updated on: 2017-05-30
< 1 2 34 5 6 7 8 9 10 > >| 
List retrieved on: 2017-07-23
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top