Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements

Download results of this page

Refine by:

Advanced search

Results 31 - 40 of 800
Order by: Results/page:
|< < 3 45 6 7 8 9 10 11 12 > >| 
Near-Wall Simulations and Measurements in Lean-Burn Engines
ID: 639510
Start date: 2014-10-01, End date: 2016-03-31
"In modern aero-engine combustors combustor tiles are used to protect the walls from the hot gases, the temperature of which is rising in new engines due to increasing pressure ratios. However, the amount of air used for wall cooling should be reduced to allow for maximal air...
Programme: FP7-JTI
Record Number: 192562
Last updated on: 2015-03-12
PySimulator and Modelica Based Collaborative System Design Simulation Analysis Environment for Energy System Applications
ID: 632413
Start date: 2014-10-01, End date: 2016-09-30
The PyModSimA project develops new open-source vendor-independent collaborative system design and modeling & simulation tools. This will enable more efficient development processes involving aircraft, engine, and equipment manufacturers, e.g. for application in Green Operatio...
Programme: FP7-JTI
Record Number: 192500
Last updated on: 2016-03-31
High Voltage Connector for PWM Application
ID: 619012
Start date: 2014-10-01, End date: 2016-03-31
"Over the last years has started the need on commercial aircrafts to replace hydraulic systems with electrical ones. This approach has led to the development of materials able to carry high powers towards motors, actuators, and other equipments. Moreover, the introduction of ...
Programme: FP7-JTI
Record Number: 192356
Last updated on: 2015-03-11
Design of Experiments to OPTIMIZE design solutions for a Power reduction Gearbox
ID: 641542
Start date: 2014-10-01, End date: 2016-06-30
The project's goal is the realisation of a dedicated experimental DOE, to evaluate the effect of tolerance variation in the gear efficiency. Users of cylindrical gears in aeronautics demand continuous improvement such as increased power density, lightweight, compact size, red...
Programme: FP7-JTI
Record Number: 192607
Last updated on: 2017-04-10
MEMS-Accelerometer Miniaturisation of the analogue electronics in an Application Specific Circuit (ASIC)
ID: 641539
Start date: 2014-10-01, End date: 2016-12-31
Very small inertial measurement units (IMU) are necessary for measuring the aircraft wing deformation during flight. This objective can be only met, if the sensor system is highly integrated. GEMAC and AMAC will develop in the project an ASIC in which all necessary analog blo...
Programme: FP7-JTI
Record Number: 198151
Last updated on: 2016-12-12
Optimizing power density of aircraft inverter by optimized topology and PWM-pattern
ID: 640714
Start date: 2014-10-01, End date: 2016-11-30
The project is aimed at an increase of power density (kW per kg) of a three-phase inverter for aerospace application (power range 10 … 50 kW) of at least 10% with a concomitant compliance with RTCA DO-160, chapter 21 CMC limits. The increase in power density will be achieved ...
Programme: FP7-JTI
Record Number: 192277
Last updated on: 2016-03-31
Stack design for a Megawatt scale PEM electrolyser
ID: 621233
Start date: 2014-10-01, End date: 2017-09-30
"Water electrolysis based on PEM technology has demonstrated its applicability to produce hydrogen and oxygen in a clean and safe way on site and on demand. Systems have been demonstrated in a wide range of niche applications with capacities from << 1 Nl/h to 30 Nm^3/h. PEM e...
Programme: FP7-JTI
Record Number: 192563
Last updated on: 2016-08-19
MAnufacTuring Improved Stack with textured Surface Electrodes for Stationary and CHP applications
ID: 621195
Start date: 2014-10-01, End date: 2017-09-30
MATISSE is a 36-month project targeting to the delivery of PEMFC advanced cells and stacks for stationary applications. The project methodology will include assessment of stack incremented with new materials and processes developed during the project. The project will address...
Programme: FP7-JTI
Record Number: 192280
Last updated on: 2016-05-31
Thermal and electrical Mock-ups for Thermal Management of a Ground Integration Test Rig
ID: 641463
Start date: 2014-10-01, End date: 2016-07-31
The TEMGIR project is for the design and development of Thermal and Electrical Mock-ups for the validation of the thermal behaviour in the electrical air systems architecture at aircraft level. TEMGIR will provide a thermal model of an aircraft with both electrical and therma...
Programme: FP7-JTI
Record Number: 193077
Last updated on: 2016-10-17
Accelerated Life tests for Electric drives in Aircrafts
ID: 641496
Start date: 2014-10-01, End date: 2016-07-31
Reliability in electronics is nowadays one of the most important subjects of study, as the range of its application is very wide. At the moment, the lifetime problems have been addressed by analysing separately the causes of failure and accelerated tests were proposed for the...
Programme: FP7-JTI
Record Number: 193064
Last updated on: 2016-07-08
|< < 3 45 6 7 8 9 10 11 12 > >| 
List retrieved on: 2017-10-18
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top