Community Research and Development Information Service - CORDIS

Results 1 - 10 of 84
Order by: Results/page:
12 3 4 5 6 7 8 9 > 
QUANTItative scanning probe microscopy techniques for HEAT transfer management in nanomaterials and nanodevices
ID: 604668
Start date: 2013-12-01, End date: 2017-11-30
The thermal properties of nanostructured materials are of fundamental importance to modern technology, but at present reproducible metrological definitions, tools and methods do not exist. This is because the mechanisms of heat transport at the nanoscale are entirely differen...
Programme: FP7-NMP
Record Number: 111004
Last updated on: 2017-09-24
Taking Nanotechnological Remediation Processes from Lab Scale to End User Applications for the Restoration of a Clean Environment
ID: 309517
Start date: 2013-02-01, End date: 2017-01-31
NANOREM is designed to unlock the potential of nanoremediation and so support both the appropriate use of nanotechnology in restoring land and aquifer resources and the development of the knowledge-based economy at a world leading level for the benefit of a wide range of user...
Programme: FP7-NMP
Record Number: 106322
Last updated on: 2017-09-10
A Multiscale Simulation-Based Design Platform for Cost-Effective CO2 Capture Processes using Nano-Structured Materials (NanoSim)
ID: 604656
Start date: 2014-01-01, End date: 2017-12-31
The objective of the NanoSim project is to create an efficient and cost effective multi-scale simulation platform based on free and open-source codes. This platform will connect models spanning a wide range of scales from the atomic scale through the particle and cluster scal...
Programme: FP7-NMP
Record Number: 110631
Last updated on: 2017-08-27
Affordable and Adaptable Public Buildings through Energy Efficient Retrofitting
ID: 609060
Start date: 2013-09-01, End date: 2018-02-28
Buildings consume about 40% of total final energy in Europe, and those built before 1980 represent 95% of this energy consumption. The low renovation rate of building stock (1% per year) means that boosting energy efficient buildings’ retrofitting is the only way to reach EU’...
Programme: FP7-NMP
Record Number: 108894
Last updated on: 2017-08-13
re-conceptualize shopping malls from consumerism to energy conservation
ID: 608678
Start date: 2013-10-01, End date: 2017-09-30
CommONEnergy focuses on existing shopping malls to be refurbished and buildings with a different original function, redesigned to become shopping malls. Wholesales&Retail buildings represent 28% of the total non-residential building stock (BPIE, 2010), accounting for approxim...
Programme: FP7-NMP
Record Number: 109515
Last updated on: 2017-08-13
Scanning Neutral Helium Microscopy: A novel tool for fast, nondestuctive characterisation of mechanical parameters for nanostructured coatings
ID: 309672
Start date: 2013-03-01, End date: 2016-08-31
The majority of failures in pattern replication processes are caused by wear of forming and forging master tools. Tribology is the science applied for lowering the wear by developing advanced (nanostructured) coatings. However, even these coatings are subject to wear that man...
Programme: FP7-NMP
Record Number: 106541
Last updated on: 2017-07-02
European Network on the Health and Environmental Impact of Nanomaterials
ID: 218539
Start date: 2008-04-01, End date: 2012-03-31
Recent technological advances allow the targeted production of objects and materials in the nanoscale (smaller than 100 nm). Nanomaterials have chemical, physical and bioactive characteristics, which are different from those of larger entities of the same materials. Nanoparti...
Programme: FP7-NMP
Record Number: 86639
Last updated on: 2017-05-30
Rolled multi material layered 3D shaping technology
ID: 214122
Start date: 2008-10-01, End date: 2012-10-31
Various emerging markets in the field of non silicon multimaterial micro devices offer a huge potential for commercialisation in the near future. However, solutions for mass-production for most of them have still to be developed. The objective of the MULTILAYER project is to ...
Programme: FP7-NMP
Record Number: 89314
Last updated on: 2017-05-30
Novel approaches for the development of customized skin treatments and services  (Test case: Dead Sea Minerals and Conventional drugs)
ID: 213202
Start date: 2008-09-01, End date: 2012-08-31
Economical and health interests of skin problems are fast growing issues in Europe, following the remarkable extension in life expectancy in western countries, together with the increased awareness of UV radiation risks. Personalized health care approach has been discussed ov...
Programme: FP7-NMP
Record Number: 89310
Last updated on: 2017-05-29
Intelligent and Customized Tooling
ID: 246172
Start date: 2010-10-01, End date: 2013-09-30
Intelligent and Customized Tooling (IC2) addresses the need for new technology and organizational models for the tooling industry. By developing a technological foundation and organizational models for intelligent tooling systems customized for user’s needs, the European tool...
Programme: FP7-NMP
Record Number: 96188
Last updated on: 2017-05-29
12 3 4 5 6 7 8 9 > 
List retrieved on: 2017-10-24
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top