Community Research and Development Information Service - CORDIS

Results 1 - 10 of 21
Order by: Results/page:
12 3 > 
INTELLIGENT MOBILE MULTIPURPOSE ACCURATE THERMOELECTRICAL (IMAT) DEVICE FOR ART CONSERVATION
ID: 283110
Start date: 2011-11-01, End date: 2014-10-31
The IMAT project aims to integrate the cutting edge research in nanotechnology with that of cultural heritage conservation for the development of new advanced conservation techniques and materials. A consortium of researchers representing expertise in the areas of art conserv...
Programme: FP7-NMP
Record Number: 101242
Last updated on: 2017-06-26
Monolithic reactors structured at the nano and micro levels for catalytic water purification
ID: 226347
Start date: 2009-05-01, End date: 2012-04-30
This project aims at the preparation and testing of catalyst supported on structured reactors (ceramic and metallic honeycomb monoliths, metallic filters, carbon cloth) coated with nanocarbon materials (NCM), namely carbon nanofibers (CNF) and carbon nanotubes (CNT). This str...
Programme: FP7-NMP
Record Number: 91126
Last updated on: 2017-05-29
Nanotechnology Enhanced Extruded Fibre Reinforced Foam Cement Based Environmentally Friendly Sandwich Material for Building Applications
ID: 262954
Start date: 2011-12-01, End date: 2014-11-30
Fibre Reinforced Cement (FRC) is a durable, fire and corrosion resistant material widely used in the construction industry. Coupled with the low cost of Portland cement, these properties make it ideally suited for applications such as roofing tiles and sidings. However the pr...
Programme: FP7-NMP
Record Number: 101041
Last updated on: 2017-05-26
New Advanced iNsulatiOn Phase Change Materials
ID: 260056
Start date: 2010-06-01, End date: 2013-05-31
The overall objective of NANOPCM is the development, implementation, production, and demonstration of low cost and improved Phase Change Materials for new high performance insulation components in existing buildings. For this purpose, different technical innovations will be c...
Programme: FP7-NMP
Record Number: 94641
Last updated on: 2017-05-26
Development of sustainable solutions for nanotechnology-based products based on hazard characterization and LCA
ID: 247989
Start date: 2010-05-01, End date: 2013-05-31
Objective of the NanoSustain project is to develop innovative solutions for the sustainable design, use, recycling and final treatment of nanotechnology-based products This will be achieved by a comprehensive data gathering and generation of relevant missing data, as well as ...
Programme: FP7-NMP
Record Number: 94362
Last updated on: 2017-05-25
New Designs of Ecological Furnaces
ID: 246335
Start date: 2010-06-01, End date: 2014-05-31
The general objective of the EDEFU project consists in developing new technologies of heating, new refractory materials to improve heat insulations and new designs for innovating recovery systems for residues for industrial furnaces in Non ferrous metals, glass, ceramics and ...
Programme: FP7-NMP
Record Number: 97000
Last updated on: 2017-05-25
EUROpean network of trans-national collaborative RTD in the field of NANOMEDicine
ID: 234811
Start date: 2009-01-01, End date: 2011-12-31
Nanomedicine is an emerging field with a large potential for developing public welfare and economic growth. Critical issues for bringing up this potential in Europe concern especially the maturity of the economic players and their capability to move effectively innovation fro...
Programme: FP7-NMP
Record Number: 91308
Last updated on: 2017-05-25
Ultra - thin conductive ceramic mesh to monitor stress and wear on a steel surface
ID: 229099
Start date: 2009-10-01, End date: 2012-10-31
The aim of the project is the development of a pre-commercial prototype mould with built in continuous structural health monitoring. This will be achieved by carrying out research work appropriate for developing femtosecond laser metal processing techniques to produce smooth ...
Programme: FP7-NMP
Record Number: 99936
Last updated on: 2017-05-25
Protective Responsive Outer Shell for People in Industrial Environments
ID: 229042
Start date: 2009-12-01, End date: 2012-11-30
In the Prospie project a new generation of work wear will be developed and produced. Special features of the work wear will be a dynamic cooling system in order to prevent workers from hyperthermia, smart interfaces for measuring essential physical parameters of workers and t...
Programme: FP7-NMP
Record Number: 94125
Last updated on: 2017-05-25
Ankle and Foot Orthotic Personalisation via Rapid Manufacturing
ID: 228893
Start date: 2009-10-01, End date: 2013-09-30
Disabling foot and ankle pain is common; it impacts negatively on health related quality of life, and it is has major cost implications on health systems across Europe. Foot and ankle orthoses are an effective treatment for these conditions. However, the market is dominated b...
Programme: FP7-NMP
Record Number: 92105
Last updated on: 2017-05-25
12 3 > 
List retrieved on: 2017-10-20
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top