Community Research and Development Information Service - CORDIS

Horizon 2020 project information and now also report summaries are available on CORDIS. All H2020 projects can be downloaded from the EU Open Data Portal .

My refinements

Download results of this page

Refine by:

Advanced search

Results 1 - 10 of 20
Order by: Results/page:
12 > 
ID: 232305
Start date: 2010-01-01, End date: 2012-12-31
In general, marine fish species have a very short period (a “quality window” of few hours) when ovulated eggs are of outstanding quality and when fertilization results in high quality embryos and juveniles. Environmental conditions and broodstock tank construction should ther...
Programme: FP7-SME
Record Number: 107743
Last updated on: 2017-01-30
Development of an objective method to perform quality classification of comminuted poultry meat
ID: 605621
Start date: 2014-01-01, End date: 2016-03-31
Deboning of meat is an important technology to improve yield and sustainability of meat production. But mechanically separated meat (MSM) is generally considered to be of inferior quality, and its use is subject to strict regulations. In contrast, manually separated meat is a...
Programme: FP7-SME
Record Number: 185468
Last updated on: 2017-01-23
Development of the implementation modalities for the establishment of a new externalised Exploratory Awards scheme for SMEs
ID: 217838
Start date: 2007-12-01, End date: 2008-06-30
The European Commission has decided to experiment under FP7 a new approach for an Exploratory Awards (EA) scheme for a limited period. As a first approach, the general aim of this EA scheme is to provide financial support to SMEs and SMEs Associations in order to submit bette...
Programme: FP7-SME
Record Number: 88360
Last updated on: 2016-10-24
Convenience Food Enriched with Marine based Raw Materials
ID: 606023
Start date: 2014-01-01, End date: 2015-12-31
Recent process improvements have created new possibilities for the use of marine based ingredients in functional foods. Consumers tend to favour functional foods over supplementary pills as means to prevent diseases. The market for these types of products is one of the fastes...
Programme: FP7-SME
Record Number: 192388
Last updated on: 2016-10-17
Microwave Drying for the Rapid Remediation of Flooded Buildings
ID: 232140
Start date: 2010-01-01, End date: 2012-03-31
Our idea is to develop microwave technology which will reduce drying times in buildings after flooding events. A single Microdry unit will run off mains electricity be capable of drying a room in just 10% of the time taken by current technologies. We will develop an intellige...
Programme: FP7-SME
Record Number: 107639
Last updated on: 2016-09-12
Pre-cast Concrete Pile Monitoring from Manufacture to after Installation
ID: 222121
Start date: 2008-09-01, End date: 2011-02-28
Concrete piles are being used extensively in the civil construction industry, but there are a lot of issues to be addressed in the integrity testing of these piles. The most commonly used concrete piles are the pre-cast concrete piles and the cast in-situ concrete piles. Cast...
Programme: FP7-SME
Record Number: 92515
Last updated on: 2016-09-12
Intelligent Motion Analysis - Development of a novel technology that makes quantitative measurement of musculoskeletal problems available, in the interests of physiotherapists, patients and society
ID: 315551
Start date: 2012-10-01, End date: 2016-05-31
This project will provide a more accurate and low cost tool for quantitative measurement of musculoskeletal conditions, one of the most widespread and costly illnesses in society today. It will provide physiotherapists with wireless, light and easy to use measuring units that...
Programme: FP7-SME
Record Number: 104928
Last updated on: 2016-07-18
Monoblock Acetabular cup with Trabecular-like Coating
ID: 286548
Start date: 2011-10-01, End date: 2013-09-30
The project aim is to enhance the research and innovation of three SMEs working in different sectors namely glass production, coatings fabrication and software on demand. These SMEs will commercially exploit the project findings on osteoinductive coatings and scaffolds. Witho...
Programme: FP7-SME
Record Number: 100887
Last updated on: 2016-03-18
An innovative low-cost and flexible 3D scanning system
ID: 262516
Start date: 2010-11-01, End date: 2013-07-31
The three-dimensional optical measurement of objects and surfaces is a state of the art technology in many industries like the automotive or medical sector. It is used for the reverse engineering process, the quality management and new fields of application like inspection an...
Programme: FP7-SME
Record Number: 98643
Last updated on: 2016-03-16
OPTICAST: Production of two phase low cost functional gradient recyclable wear resistant Cast Iron products
ID: 262503
Start date: 2011-08-01, End date: 2013-07-31
This project will provide a more efficient and environmentally friendly method to produce wear resistant cast iron products which are hard only in strategic locations and softer and more machinable elsewhere, creating a more flexible product in a one step process. This will c...
Programme: FP7-SME
Record Number: 99642
Last updated on: 2016-03-16
12 > 
List retrieved on: 2017-04-27
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top