Community Research and Development Information Service - CORDIS

Results 1 - 10 of 162
Order by: Results/page:
12 3 4 5 6 7 8 9 10 > >| 
Anti-microbial, self-cleaning copper composite coatings applied in metallic objects against infections transmission
ID: 606104
Start date: 2013-12-01, End date: 2015-11-30
Infection prevention measures aim to ensure the protection of people who might be vulnerable to acquiring an infection both in the general community and while receiving care due to health problems. The basic principle of infection prevention and control is hygiene. Hygiene co...
Programme: FP7-SME
Record Number: 111076
Last updated on: 2017-09-10
Development of novel Non Destructive Testing (NDT) techniques and autonomous robots to be deployed by Remote Operating Vehicles for the sub-sea inspection of offshore structure welds - DEMOnstration
ID: 605969
Start date: 2014-10-01, End date: 2016-09-30
The SubCTest Demo project, a continuation of the FP7 R4S SubCTest project, has the objective to successfully demonstrate a robust NDT system, deployed by a Remote Operating Vehicle (ROV), that will reliably detect and evaluate discontinuities in pipes, risers and tubular stru...
Programme: FP7-SME
Record Number: 192214
Last updated on: 2017-09-10
(Multi-) Senor Offshore Safety system
ID: 605963
Start date: 2014-06-01, End date: 2016-05-31
Offshore activities including maritime transport faces the inherent risk of loss of humans at sea. This activity proposes to develop a multi-sensor network solution that has several means to detect, characterise, classify and track humans going overboard in an all environment...
Programme: FP7-SME
Record Number: 188532
Last updated on: 2017-09-10
Development of a Low Cost Ceramic Buoyancy Sphere
ID: 606331
Start date: 2014-04-01, End date: 2016-03-31
Oil and gas exploration is being carried out in ever deeper water, as more readily-exploitable reserves become depleted. And whilst previously uneconomical deep-water oilfields are now becoming financially viable, accessing them remains difficult due to the technical challeng...
Programme: FP7-SME
Record Number: 185472
Last updated on: 2017-08-22
Convenience Food Enriched with Marine based Raw Materials
ID: 606023
Start date: 2014-01-01, End date: 2015-12-31
Recent process improvements have created new possibilities for the use of marine based ingredients in functional foods. Consumers tend to favour functional foods over supplementary pills as means to prevent diseases. The market for these types of products is one of the fastes...
Programme: FP7-SME
Record Number: 192388
Last updated on: 2017-08-22
Oxygenation by efficient air diffusion system for aquaculture farms (cages and earthen ponds)
ID: 315412
Start date: 2012-09-01, End date: 2014-11-30
The AirX Research for SMEs project will develop a novel efficient air diffusion system for oxygenation in aquaculture farms. The target market are cage and earthen pond farmers (seabass and seabream) in Mediterranean, which periodically experience problems with reduced growth...
Programme: FP7-SME
Record Number: 105760
Last updated on: 2017-08-22
Development of a portable miniature mass spectrometer to monitor important, but technically difficult parameters in aquaculture
ID: 606496
Start date: 2013-10-01, End date: 2015-09-30
The AquaMMS project will improve today's SoA by developing a robust and portable miniature mass spectrometer, which will monitor online a wide range of vital water quality parameters simultaneously. AquaMMS will be suitable for use primarily in land-based aquaculture industry...
Programme: FP7-SME
Record Number: 111211
Last updated on: 2017-07-12
Developing a 1.2 kW air-to-air single-room heat pump unit for heating, ventilation, and air-conditioning
ID: 243647
Start date: 2010-08-01, End date: 2013-11-30
We, EU HVAC industry AGs, represent the interests of more than 4,900 SME firms active in installation, commissioning and maintenance of heating, AC, and ventilation devices, are under threat from upcoming EC regulations (expected full compliance by 2015) to phase out such dev...
Programme: FP7-SME
Record Number: 95318
Last updated on: 2017-07-12
Real-Time In Situ Monitoring of Tool Wear in Precision Engineering Applications
ID: 315067
Start date: 2014-01-01, End date: 2015-12-31
In precision engineering, the degradation of the cutting surface (tool wear) has the greatest affect on accuracy and surface finish of machined parts. Tool wear is the greatest single contributor to scrap (waste material). In the surgical products market, cosmetic finish requ...
Programme: FP7-SME
Record Number: 111258
Last updated on: 2017-06-21
Feasibility study of triploid salmon production
ID: 222115
Start date: 2008-07-01, End date: 2011-06-30
With the rapid growth of aquaculture seen in recent years, one major fundamental problem has arisen being the environmental pollution due to increased numbers of escapee fish interacting with wild populations. A greater public awareness, the need to protect natural resources ...
Programme: FP7-SME
Record Number: 92644
Last updated on: 2017-05-30
12 3 4 5 6 7 8 9 10 > >| 
List retrieved on: 2017-09-23
Follow us on: RSS Facebook Twitter YouTube Managed by the EU Publications Office Top